Configuring FSSO Advanced Settings

Testing FSSO

Once FSSO is configured, you can easily test to ensure your configuration is working as expected. For additional FSSO testing, see Troubleshooting FSSO on page 594.

1. Logon to one of the stations on the FSSO domain, and access an Internet resource.

2. Connect to the CLI of the FortiGate unit, and if possible log the output.

3. Enter the following command:

diagnose debug authd fsso list

4. Check the output. If FSSO is functioning properly you will see something similar to the following:

—-FSSO logons—-

IP: 10.10.20.3 User: ADMINISTRATOR Groups: CN=FORTIOS WRITERS,CN=USERS,DC=TECHDOC,DC=LOCAL Workstation: WIN2K8R2.TECHDOC.LOCAL MemberOf: FortiOS_Writers

IP: 10.10.20.7 User: TELBAR Groups: CN=FORTIOS WRITERS,CN=USERS,DC=TECHDOC,DC=LOCAL Workstation: TELBAR-PC7.TECHDOC.LOCAL

Total number of logons listed: 2, filtered: 0

—-end of FSSO logons—-

The exact information will vary based on your installation.

5. Check the FortiGate event log, for FSSO-auth action or other FSSO related events with FSSO information in the message field.

6. To check server connectivity, run the following commands from the CLI:

FGT# diagnose debug enable

FGT# diagnose debug authd fsso server-status

FGT# Server Name Connection Status Version

———- —————– ——- techdoc      connected FSSO 5.0.0241

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.