Tag Archives: Fortinet

Fortinet Single Sign On – FortiAuthenticator 4.0

Fortinet Single Sign-On

FSSO is a set of methods to transparently authenticate users to FortiGate and FortiCache devices. This means that the FortiAuthenticator unit is trusting the implicit authentication of a different system, and using that to identify the user. FortiAuthenticator takes this framework and enhances it with several authentication methods:

Users can authenticate through a web portal and a set of embeddable widgets. l Users with FortiClient Endpoint Security installed can be automatically authenticated through the FortiClient SSO Mobility Agent.
Users authenticating against Active Directory can be automatically authenticated. l RADIUS Accounting packets can be used to trigger an FSSO authentication. l Users can be identified through the FortiAuthenticator API. This is useful for integration with third party systems.

The FortiAuthenticator unit must be configured to collect the relevant user logon data. After this basic configuration is complete, the various methods of collecting the log in information can be set up as needed.

Domain controller polling

When the FortiAuthenticator runs for the first time, it will poll the domain controller (DC) logs backwards until either the end of the log file or the logon timeout setting, whichever is reached first.

When the FortiAuthenticator is rebooted, the memory cache is written to the disk, then re-read at startup, allowing the previous state to be retained. Windows DC polling restarts on boot, then searches backwards in the DC log files until it reaches either the log that matches the last known serial number found in the login cache file, the log that is older than the last recorded read time, or the end of the log file, whichever is reached first.

The currently logged in FSSO users list is cached in memory and periodically written to disk. In an active-passive HA cluster, this file is synchronized to the slave device.

Windows management instrumentation polling

The FortiAuthenticator supports Windows Management Instrumentation (WMI) polling to detect workstation log off. This validates the currently logged on user for an IP address that has been discovered by the DC polling detection method.

Remote WMI access requires that the related ports are opened in the Windows firewall, and access to a domain account that belongs to the Domain Admin group.

To open ports in the Windows firewall in Windows 7, run gpedit.msc, go to Computerconfiguration >

Administrative Templates > Network > Network Connections > Windows Firewall > Domain Profile, go to Allow remote admin exception, then enable remote admin exception and, if necessary, configure an IP subnet/range.

General settings

The FortiAuthenticator unit listens for requests from authentication clients and can poll Windows Active Directory servers.

To configure FortiAuthenticator FSSO polling:

Go to Fortinet SSO Methods > SSO > General to open the Edit SSO Configuration The Edit SSO Configuration window contains sections for FortiGate, FSSO, and user group membership.
In the FortiGate section, configure the following settings:

Listening port	Leave at 8000 unless your network requires you to change this. Ensure this port is allowed through the firewall.
Enable authentication	Select to enable authentication, then enter a secret key, or password, in the Secret key field.
Login Expiry	The length of time, in minutes, that users can remain logged in before the system logs them off automatically. The default is 480 minutes (8 hours).
Extend user session beyond logoff by	The length of time, in seconds, that a user session is extended after the user logs off, from 0 (default) to 3600 seconds.
Enable NTLM authentication	Select to enable NTLM authentication, then enter the NETBIOS or DNS name of the domain that the login user belongs to in the Userdomain field.

In the Fortinet Single Sign-On (FSSO) section, configure the following settings:

Maximum concurrent user sessions

Enter the maximum number of concurrent FSSO login sessions a user is allowed to have. Use 0 for unlimited.

Select Configure Per User/Group to configure the maximum number of concurrent sessions for each user or group. See Fine-grained controls on page 112.

Log Level

Select one of Debug, Info, Warning, or Error as the minimum severity level of events to log from the drop- down list.

Select Download all logs to download all FSSO logs to your management computer.

General settings

Enable Windows Active

Directory domain controller polling

Select to enable Windows AD polling.

Select to enable polling additional logon events, including from devices using Kerberos authentication or from Mac OS X systems, and from event IDs 672, 680, 4776, and 4768.

Enable polling additional logon events

When additional active directory logon event IDs is enabled, event IDs 528, 540, and 4624 are also polled. These event are generated when a user attempts to access a domain service or resource. When a user logs off from the workstation, such an event will be generated.

Enter the additional logon event timeout time in the Additional logon event timeout field, from 1 to 480 minutes, with 5 minutes being the default time.

Note: After a user logs off, their SSO session will stay active for the above configured period of time. During this time, if another user changes to the previous user’s IP address, they may be able to bypass the necessary authentication. For this reason, it is strongly recommended that the timeout time be kept short.

Enable DNS

lookup to get IP

from workstation name

Select to use DNS lookup to get IP address information when an event contains only the workstation name.

This option is enabled by default.

Directly use domain DNS

suffix in lookup

Select to use the domain DNS suffix when doing a DNS lookup.

This option is disabled by default.

Enable reverse DNS lookup to get workstation name from IP

Select to enable reverse DNS lookup. Reverse DNS lookup is used when an event contains only an IP address and no workstation name.

This option is enabled by default.

Do one more DNS lookup to get full list of IPs after reverse lookup of workstation name

Reverse DNS lookup is used when an event contains only an IP address and no workstation name. Once the workstation name is determined, it is used in the DNS lookup again to get more complete IP address

information. This is useful in environments where workstations have multiple network interfaces.

This option is disabled by default.

Include account name ending

with $ (usually computer account)

Accounts that end in “$” used to exclusively denote computer accounts with

no actual user, but in some cases, valid accounts imported from dated systems can feature them.

This option is disabled by default.

Enable Radius Accounting SSO clients

Select to enable the detection of users sign-ons and sign- offs from incoming RADIUS accounting (Start, Stop, and Interim-Update) records.

Use RADIUS realm as

Windows Active

Directory domain

Select to use the RADIUS realm as the Windows AD domain.

Enable Syslog SSO

Select to enable Syslog SSO.

General settings

Enable FortiClient SSO Mobility Agent Service	Select to enable single sign-on (SSO) by clients running FortiClient Endpoint Security. For more information, see FortiClient SSO Mobility Agent on page 123.
FortiClient listening port	Enter the FortiClient listening port number.
Enable authentication	Select to enable authentication, then enter a secret key, or password, in the Secret key field.
Keep-alive interval	Enter the duration between keep-alive transmissions, from 1 to 60 minutes. Default is 5 minutes.
Idle timeout	Enter an amount of time after which to logoff a user if their status is not updated. The value cannot be lower than the Keep-alive interval value.
Enable NTLM	Select to enable the NT LAN Manager (NTLM) to allow logon of users who are connected to a domain that does not have the FSSO DC Agent installed. Disable NTLM authentication only if your network does not support NTLM authentication for security or other reasons. Enter an amount of time after which NTLM authentication expires in the NTLM authentication expiry field, from 1 to 10080 minutes (7 days).
Enable hierarchical FSSO tiering	Select to enable hierarchical FSSO tiering. Enter the collector listening port in the Collectorlistening port field.
Enable DC/TS Agent Clients	Select to enable clients using DC or TS Agent. Enter the UDP port in the DC/TS Agent listening port field. Default is 8002. Select Enable authentication to enable authentication, then enter a secret key, or password, in the Secret key field.
Restrict auto- discovered domain controllers to configured domain controllers	Select to enable restricting automatically discovered domain controllers to already configured domain controllers only. See Domain controllers on page 114.
Enable Windows Active Directory workstation IP verification	Select to enable workstation IP verification with Windows Active Directory. If enabled, select Enable IP change detection via DNS lookup to detect IP changes via DNS lookup.

In the UserGroup Membership section, configure the following settings:

General settings

Group cache mode	Select the group cache mode: l Passive: Items have an expiry time after which the are removed and re-queried on the next logon. l Active: Items are periodically updated for all currently logged on users.
Group cache item lifetime	Enter the amount of time after which items will expire (default = 480 minutes). This is only available when the group cache mode is set to Passive.
Do not use cached groups…	Select to prevent using cached groups and to always load groups from server for the following SSO sources: l Windows Active Directory domain controller polling l RADIUS Accounting SSO l Syslog SSO l FortiClient SSO Mobility Agent l DC Agent l TS Agent l User login portal l SSO web service
Base distinguished names to search…	Enter the base distinguished names to search for nesting of users or groups into cross domain and domain local groups.

Select OK to apply the settings.

Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Pages: 1 2 3 4 5

Port Based Network Access Control – FortiAuthenticator 4.0

1 Reply

Port-based Network Access Control

Port-based Network Access Control (PNAC), or 802.1X, authentication requires a client, an authenticator, and an authentication server (such as a FortiAuthenticator device).

The client is a device that wants to connect to the network. The authenticator is simply a network device, such as a wireless access point or switch. The authentication server is usually a host that supports the RADIUS and EAP protocols.

The client is not allowed access to the network until the client’s identity has been validated and authorized. Using 802.1X authentication, the client provides credentials to the authenticator, which the authenticator forwards to the authentication server for verification. If the authentication server determines that the credentials are valid, the client device is allowed access to the network.

FortiAuthenticator supports several IEEE 802.1X EAP methods.

EAP

The FortiAuthenticator unit supports several IEEE 802.1X EAP methods. These include authentication methods most commonly used in WiFi networks.

EAP is defined in RFC 3748 and updated in RFC 5247. EAP does not include security for the conversation between the client and the authentication server, so it is usually used within a secure tunnel technology such as TLS, TTLS, or MS-CHAP.

The FortiAuthenticator unit supports the following EAP methods:

Method	Server Auth	Client Auth	Encryption	Native OS Support
PEAP (MSCHAPv2)	Yes	Yes	Yes	Windows XP, Vista, 7
EAP-TTLS	Yes	No	Yes	Windows Vista, 7
EAP-TLS	Yes	Yes	Yes	Windows (XP, 7), Mac OS X, iOS, Linux, Android
EAP-GTC	Yes	Yes	Yes	None (external supplicant required)

In addition to providing a channel for user authentication, EAP methods also provide certificate-based authentication of the server computer. EAP-TLS provides mutual authentication: the client and server authenticate each other using certificates. This is essential for authentication onto an enterprise network in a BYOD environment.

For successful EAP-TLS authentication, the user’s certificate must be bound to their account in Authentication >

UserManagement > Local Users (see Local users on page 58) and the relevant RADIUS client in Authentication > RADIUS Service > Clients (see RADIUS service on page 91) must permit that user to authenticate. By default, all local users can authenticate, but it is possible to limit authentication to specified user groups.

Port-based Network Access Control EAP

The FortiAuthenticator unit and EAP

A FortiAuthenticator unit delivers all of the authentication features required for a successful EAP-TLS deployment, including:

Certificate Management: create and revoke certificates as a CA. See Certificate Management on page 132.
Simple Certificate Enrollment Protocol (SCEP) Server: exchange a Certificate Signing Request (CSR) and the resulting signed certificate, simplifying the process of obtaining a device certificate.

FortiAuthenticator unit configuration

To configure the FortiAuthenticator unit, you need to:

Create a CA certificate for the FortiAuthenticator unit. See Certificate authorities on page 140.

Optionally, you can skip this step and use an external CA certificate instead. Go to Certificate Management > Certificate Authorities > Trusted CAs to import CA certificates. See Trusted CAs on page 147.

Create a server certificate for the FortiAuthenticator unit, using the CA certificate you created or imported in the preceding step. See End entities on page 133.
If you configure EAP-TTLS authentication, go to Authentication > RADIUS Service > EAP and configure the certificates for EAP. See Configuring certificates for EAP on page 102.
If SCEP will be used:
1. Configure an SMTP server to be used for sending SCEP notifications. Then configure the email service for the administrator to use the SMTP server that you created. See E-mail services on page 46.
2. Go to Certificate Management > SCEP > General and select Enable SCEP. Then select the CA certificate that you created or imported in Step 1 in the Default CA field and select OK. See SCEP on page 147.
Go to Authentication > Remote Auth. Servers > LDAP and add the remote LDAP server that contains your user database. See LDAP on page 88.
Import users from the remote LDAP server. You can choose which specific users will be permitted to authenticate. See Remote users on page 65.
Go to Authentication > RADIUS Service > Clients to add the FortiGate wireless controller as an authentication client. Be sure to select the type of EAP authentication you intend to use. See RADIUS service on page 91.

Configuring certificates for EAP

The FortiAuthenticator unit can authenticate itself to clients with a CA certificate.

Go to Certificate Management > Certificate Authorities > Trusted CAs to import the certificate you will use. See Trusted CAs on page 147.
Go to Authentication > RADIUS Service > EAP.
Select the EAP server certificate from the EAP ServerCertificate drop-down list.
Select the trusted CAs and local CAs to use for EAP authentication from their requisite lists.
Select OK to apply the settings.

Configuring switches and wireless controllers to use 802.1X authentication

The 802.1X configuration will be largely vendor dependent. The key requirements are:

Device self-enrollment Port-based Network Access Control

l RADIUS Server IP: This is the IP address of the FortiAuthenticator l Key: The preshared secret configured in the FortiAuthenticator authentication client settings l Authentication Port: By default, FortiAuthenticator listens for authentication requests on port 1812.

Device self-enrollment

Device certificate self-enrollment is a method for local and remote users to obtain certificates for their devices. It is primarily used in enabling EAP-TLS for BYOD. For example:

l A user brings their tablet to a BYOD organization. l They log in to the FortiAuthenticator unit and create a certificate for the device. l With their certificate, username, and password they can authenticate to gain access to the wireless network. l Without the certificate, they are unable to access the network.

To enable device self-enrollment and adjust self-enrollment settings, go to Authentication > Self-service Portal > Device Self-enrollment and select Enable userdevice certificate self-enrollment.

SCEP enrollment template	Select a SCEP enrollment template from the drop-down list. SCEP can be configured in Certificate Management > SCEP. See SCEP on page 147 for more information.
Max. devices	Set the maximum number of devices that a user can self-enroll.
Key size	Select the key size for self-enrolled certificates (1024, 2048, or 4096 bits). iOS devices only support two key size: 1024 and 2048.
Enable self-enrollment for Smart Card certificate	Select to enable self-enrollment for smart card certificates. This requires that a DNS domain name be configured, as it is used in the CRL Distribution Points (CDPs) certificate extension.

Port-based Network Access Control Non-compliant devices

Select OK to apply any changes you have made.

Non-compliant devices

802.1X methods require interactive entry of user credentials to prove a user’s identity before allowing them access to the network. This is not possible for non-interactive devices, such as printers. MAC Authentication Bypass is supported to allow non-802.1X compliant devices to be identified and accepted onto the network using their MAC address as authentication.

This feature is only for 802.1X MAC Authentication Bypass. FortiGate Captive Portal MAC Authentication is supported by configuring the MAC address as a standard user, with the MAC address as both the username and password, and not by entering it in the MAC Devices section.

Multiple MAC devices can be imported in bulk from a CSV file. The first column of the CSV file contains the device names (maximum of 50 characters), and the second column contains the corresponding MAC addresses (0123456789AB or 01:23:45:67:89:AB).

To configure MAC-based authentication for a device:

Go to Authentication > User Management > MAC Devices. The MAC device list will be shown.
If you are adding a new device, select Create New to open the Create New MAC-based Authentication Device

If you are editing an already existing device, select the device from the device list.

Enter the device name in the Name field, and enter the device’s MAC address in the MAC address
Select OK to apply your changes.

To import MAC devices:

In the MAC device list, select Import.
Select Browse to locate the CSV file on your computer.
Select OK to import the list.

The import will fail if the maximum number of MAC devices has already been reached, or if any of the information contained within the file does not conform, for example if the device name too long, or there is an incorrectly formatted MAC address.

FortiAuthenticator 4.0 System

5 Replies

System

The System tab enables you to manage and configure the basic system options for the FortiAuthenticator unit. This includes the basic network settings to connect the device to the corporate network, the configuration of administrators and their access privileges, managing and updating firmware for the device, and managing messaging servers and services.

The System tab provides access to the following menus and sub-menus:

Dashboard	Select this menu to monitor, and troubleshoot your FortiAuthenticator device. Dashboard widgets include: l System Information widget l System Resources widget l Authentication Activity widget l User Inventory widget l HA Status l License Information widget l Disk Monitor l Top User Lockouts widget
Network	Select this menu to configure your FortiAuthenticator interfaces and network settings. l Interfaces l DNS l Static routing l Packet capture
Administration	Select this menu to configure administrative settings for the FortiAuthenticator device. l GUI access l High availability l Firmware l Automatic backup l SNMP l Licensing l FortiGuard l FTP servers l Administration
Messaging	Select this menu to configure messaging servers and services for the FortiAuthenticator device. l SMTP servers l E-mail services l SMS gateways

Dashboard

When you select the System tab, it automatically opens at the System > Dashboard page.

The Dashboard page displays widgets that provide performance and status information and enable you to configure some basic system settings. These widgets appear on a single dashboard.

The following widgets are available:

System Information	Displays basic information about the FortiAuthenticator system including host name, DNS domain name, serial number, system time, firmware version, architecture, system configuration, current administrator, and up time. From this widget you can manually update the FortiAuthenticator firmware to a different release. For more information, see System Information widget on page 25.
System Resources	Displays the usage status of the CPU and memory. For more information, see System Resources widget on page 29.
Authentication Activity	Displays a customizable graph of the number of logins to the device. For more information, see Authentication Activity widget on page 29.
User Inventory	Displays the numbers of users, groups, FortiTokens, FSSO users, and FortiClient users currently used or logged in, as well as the maximum allowed number, the number still available, and the number that are disabled. For more information, see User Inventory widget on page 29.
HA Status	Displays whether or not HA is enabled.
License Information	Displays the device’s license information, as well as SMS information. For more information, see License Information widget on page 29.
Disk Monitor	Displays if RAID is enabled, and the current disk usage in GB.
Top User Lockouts	Displays the top user lockouts. For more information, see Top User Lockouts widget on page 30.

Customizing the dashboard

The FortiAuthenticator system settings dashboard is customizable. You can select which widgets to display, where they are located on the page, and whether they are minimized or maximized.

To move a widget

Position your mouse cursor on the widget’s title bar, then click and drag the widget to its new location.

To add a widget

In the dashboard toolbar, select Add Widget, then select the name of widget that you want to show. Multiple widgets of the same type can be added. To hide a widget, in its title bar, select the Close icon.

To see the available options for a widget

Position your mouse cursor over the icons in the widget’s title bar. Options include show/hide the widget, edit the widget, refresh the widget content, and close the widget.

The following table lists the widget options.

Show/Hide arrow	Display or minimize the widget.
Widget Title	The name of the widget.
Edit	Select to change settings for the widget. This option appears only in certain widgets.
Refresh	Select to update the displayed information.
Close	Select to remove the widget from the dashboard. You will be prompted to confirm the action. To add the widget, select Widget in the toolbar and then select the name of the widget you want to show.

To change the widget title

Widget titles can be customized by selecting the edit button in the title bar and entering a new title in the widget settings dialog box. Some widgets have more options in their respective settings dialog box.

To reset a widget title to its default name, simply leave the Custom widget title field blank.

The widget refresh interval can also be manually adjusted from this dialog box.

System Information widget

The system dashboard includes a System Information widget, which displays the current status of the FortiAuthenticator unit and enables you to configure basic system settings.

The following information is available on this widget:

Host Name	The identifying name assigned to this FortiAuthenticator unit. For more information, see Changing the host name on page 26.
DNS Domain Name	The DNS domain name. For more information, see Changing the DNS domain name on page 27.
Serial Number	The serial number of the FortiAuthenticator unit. The serial number is unique to the FortiAuthenticator unit and does not change with firmware upgrades. The serial number is used for identification when connecting to the FortiGuard server.
System Time	The current date, time, and time zone on the FortiAuthenticator internal clock or NTP server. For more information, see Configuring the system time, time zone, and date on page 27.
Firmware Version	The version number and build number of the firmware installed on the FortiAuthenticator unit. To update the firmware, you must download the latest version from the Customer Service & Support portal at https://support.fortinet.com. Select Update and select the firmware image to load from your management computer.
Architecture	The architecture of the device, such as 32-bit.
System Configuration	The date of the last system configuration backup. Select Backup/Restore to backup or restore the system configuration. For more information, see Backing up and restoring the configuration on page 28.
Current Administrator	The name of the currently logged on administrator.
Uptime	The duration of time the FortiAuthenticator unit has been running since it was last started or restarted.
Shutdown/Reboot	Options to shutdown or reboot the device. When rebooting or shutting down the system, you have the option to enter a message that will be added to the event log explaining the reason for the shutdown or reboot.

Changing the host name

The System Information widget will display the full host name.

To change the host name:

Go to System > Dashboard.
In the System Information widget, in the Host Name field, select Change. The Edit Host Name page opens.
In the Host name field, type a new host name.

The host name may be up to 35 characters in length. It may include US-ASCII letters, numbers, hyphens, and underscores. Spaces and special characters are not allowed.

Select OK to save the setting.

Pages: 1 2 3 4 5 6 7

Logs, Reports, and Alerts

4 Replies

Logs, reports and alerts

The Log and Report menu lets you configure logging, reports, and alert email.

FortiMail units provide extensive logging capabilities for virus incidents, spam incidents and system events. Detailed log information and reports provide analysis of network activity to help you identify security issues and reduce network misuse and abuse.

Logs are useful when diagnosing problems or when you want to track actions the FortiMail unit performs as it receives and processes traffic.

This section includes:

About FortiMail logging
Configuring logging
Configuring report profiles and generating reports
Configuring alert email
Viewing log messages
Viewing generated reports

About FortiMail logging

FortiMail units can log many different email activities and traffic including:

system-related events, such as system restarts and HA activity
virus detections
spam filtering results
POP3, SMTP, IMAP and webmail events

You can select which severity level an activity or event must meet in order to be recorded in the logs. For more information, see “Log message severity levels” on page 668.

A FortiMail unit can save log messages to its hard disk or a remote location, such as a Syslog server or a Fortinet FortiAnalyzer unit. For more information, see “Configuring logging” on page 671. It can also use log messages as the basis for reports. For more information, see “Configuring report profiles and generating reports” on page 676.

Accessing FortiMail log messages

There are several ways you can access FortiMail log messages:

On the FortiMail web UI, you can view log messages by going to Monitor > Log. For details, see the FortiMail Administration Guide.
On the FortiMail web UI, under Monitor > Log, you can download log messages to your local PC and view them later.
You can send log messages to a FortiAnalyzer unit by going to Log and Report > Log Settings > Remote Log Settings and view them on FortiAnalyzer.
You can send log messages to any Syslog server by going to Log and Report > Log Settings > Remote Log Settings.

Pages: 1 2 3 4 5 6 7 8

Firewall local-in policies are supported for the dedicated HA management interface

Leave a reply

Firewall local-in policies are supported for the dedicated HA management interface

To add local in polices for the dedicated management interface, enable ha-mgmt-inft-only and set intf to any. Enabling ha-mgmt-intf-only means the local-in policy applies only to the VDOM that contains the dedicated HA management interface.

config firewall local-in-policy

edit 0

set ha-mgmt-intf-only enable

set intf any

etc…

end

Fortinet Kicking Ass On NSS Labs NGFW Security Value Report

Leave a reply

I don’t know if you guys have seen the report of not but Fortinet has whooped some serious ass on the NGFW Security Value Report from NSS Labs. In case you don’t know, NSS Labs is a truly unbiased hardware research firm. You may be thinking to yourself, “But Mike, what about Gartner?” Well, everyone knows that the Gartner reports are all about how much money you throw to line their pockets with. Cough, I mean, Cough how well you “sell” your product to them.

NSS Labs has been providing quality third party reviews and ratings of devices for a while now and according to the NGFW Security Value Report the FortiGate 3200D placed ahead of all NGFW competitors (cough Palo, Cough Check Point) in terms of NGFW (Next Generation Firewall) effectiveness.

It’s cool though. I’m sure a lot of businesses out there will keep falling for the marketing gimmicks and flashy ads for Palo Alto and Cisco. Let them waste their money while you get better value and total cost of ownership by flying under the Fortinet flag. I swear if Fortinet would listen to some of my feature requests (mostly items listed on the “Where Fortinet is Messing Up” page of this site, and get some sexy advertising going to wow the idiots out there they would squash the competition. Oh well…

NSS Labs NGFW Security Value Report

Understanding Consumer Behaviour from Wi-fi Insights

Leave a reply

We have all embraced online searching and shopping. The days of driving around town to compare costs or referring to the most current newspaper advertisement for a bargain have long gone. Today’s consumer reaches out via the Internet on a varie…
Source: Understanding Consumer Behaviour from Wi-fi Insights” target=”_blank”>Fortinet Blog

Security is at the Top of Healthcare Providers’ “Must-Do” Lists—Or It Should Be

Leave a reply

“Houston, we have a problem.” This is not news to healthcare organizations, whether they are in Houston, Boston, St. Louis or San Francisco. 2015 was a banner year in healthcare, for all the wrong reasons. The increasing number of attacks…
Source: Security is at the Top of Healthcare Providers’ “Must-Do” Lists—Or It Should Be” target=”_blank”>Fortinet Blog