View and upgrade the FortiSwitch firmware version

View and upgrade the FortiSwitch firmware version

You can view the current firmware version of a FortiSwitch and upgrade the FortiSwitch to a new firmware version. FortiGate will suggest an upgrade when a new version is available in FortiGuard.

Using the FortiGate Web interface

To view the FortiSwitch firmware version:

  1. Go to WiFi & Switch Controller>Managed FortiSwitch.
  2. In the main panel, select the FortiSwitch faceplate and click Edit.
  3. In the Edit Managed FortiSwitch panel, the Firmware section displays the current build on the FortiSwitch.

To upgrade the firmware on multiple FortiSwitch units at the same time:

  1. Go to WiFi & Switch Controller> Managed FortiSwitch.
  2. Select the faceplates of the FortiSwitch units that you want to upgrade.
  3. Click Upgrade.

The Upgrade FortiSwitches page opens.

  1. Select FortiGuard or select Upload and then select the firmware file to upload.

If you select FortiGuard, all FortiSwitch units that can be upgraded are upgraded. If you select Upload, only one firmware image can be used at a time for upgrading.

  1. Select Upgrade.

Using the CLI

Use the following command to display the latest version: diagnose fdsm fortisw-latest-ver <model>

Use the following command to download the image: diagnose fdsm fortisw-download <image id>

The following example shows how to download the latest image for FS224D:

FG100D3G15801204 (global) # diagnose fdsm fortisw-latest-ver FS224D FS224D – 3.4.2 b192 03004000FIMG0900904002FG100D3G15801204 (global) # diagnose fdsm fortisw-download 03004000FIMG0900904002

Download image-03004000FIMG0900904002:

################################################################################ Result=Success

Use the following CLI commands to enable the use of HTTPS to download firmware to managed FortiSwitch units:

config switch-controller global set https-image-push enable end

FortiSwitch log export

From your FortiGate CLI, you can upgrade the firmware of all of the managed FortiSwitch units of the same model using a single execute command. The command includes the name of a firmware image file and all of the managed FortiSwitch units compatible with that firmware image file are upgraded. For example: execute switch-controller stage-tiered-swtp-image ALL <firmware-image-file>

You can also use the following command to restart all of the managed FortiSwitch units after a 2-minute delay.

execute switch-controller restart-swtp-delayed ALL


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

This entry was posted in Administration Guides, FortiOS 6, FortiSwitch on by .

About Mike

Michael Pruett, CISSP has a wide range of cyber-security and network engineering expertise. The plethora of vendors that resell hardware but have zero engineering knowledge resulting in the wrong hardware or configuration being deployed is a major pet peeve of Michael's. This site was started in an effort to spread information while providing the option of quality consulting services at a much lower price than Fortinet Professional Services. Owns PacketLlama.Com (Fortinet Hardware Sales) and Office Of The CISO, LLC (Cybersecurity consulting firm).

3 thoughts on “View and upgrade the FortiSwitch firmware version

  1. Thuan

    Hi Mike, I was upgrading one of my switches one firmware version at a time. I was trying not to break anything. Upon reboot the switch would not start the ports blink briefly but all turn off. I can’t get in through with the console. Any hints to troubleshooting this issue? I believe I bricked it. Thuan

    Reply
    1. Mike Post author

      You can’t hit the device at all? Even through a serial port etc? Try the factory reset option with the paper clip?

      Reply

Leave a Reply to Thuan Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.