IPv6 PIM sparse mode multicast routing

IPv6 PIM sparse mode multicast routing

FortiOS supports PIM sparse mode multicast routing for IPv6 multicast (multicast6) traffic and is compliant with RFC 4601. You can use the following command to configure IPv6 PIM sparse multicast routing.

config router multicast6 set multicast-routing {enable | disable} config interface edit <interface-name> set hello-interval <1-65535 seconds> set hello-holdtime <1-65535 seconds>

end config pim-sm-global config rp-address edit <index> set ipv6-address <ipv6-address>

end

The following diagnose commands for IPv6 PIM sparse mode are also available:

diagnose ipv6 multicast status diagnose ipv6 multicast vif diagnose ipv6 multicast mroute


Having trouble configuring your Fortinet hardware or have some questions you need answered? Ask your questions in the comments below!!! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Don't Forget To Buy Your Fortinet Hardware From The Fortinet GURU

Leave a Reply

Name *
Email *
Website

This site uses Akismet to reduce spam. Learn how your comment data is processed.