Installation
The installation tab allows you to view the installation target, device settings status, policy package status, and schedule install status, and edit installation targets for policy package installs. Go to the Policy & Objects tab, select the ADOM from the drop-down list, select the policy package in the tree menu, and select the Installation tab in the Policy Package tab bar.
Installation page
This page displays the following information:
| Installation Target | The installation target and connection status. |
| Device Settings Status | The device settings synchronization status. |
| Policy Package Status | The policy package installation status. |
| Schedule Install | Displays schedule install information. |
The following options are available:
| Add | Select to add installation targets (device/group) for the policy package selected. Select the add icon beside Device/Group to select devices. |
| Edit | Select the installation target, right-click, and select Edit from the menu. |
| Delete | Select to delete the selected entries from the installation target for the policy package selected. Delete is also available in the right-click menu. |
| Install Wizard | Right-click on an entry in the table and select Install in the menu to launch the Install wizard. |
| Re-install | Right-click on an entry in the table and select Re-install in the menu to perform a quick reinstallation of the policy package to the installation targets. |
| Add to Schedule | Right-click on an entry in the table and select Add to Schedule in the menu to add the item selected to the schedule. This option is only visible when there is an active schedule for the policy package. |
| Remove from Schedule | Right-click on an entry in the table and select Remove from Schedule in the menu to remove the item selected from the schedule. This option is only visible when there is an active schedule for the policy package. |
| Select All | Right-click on an entry in the table and select Select ALL in the menu to select all entries in the table. You can then select to re-install or delete the selected the entries. |
| Search | Use the search field to search installation targets. Entering text in the search field will highlight matches. |
Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!
Question about ADOMs. In previous versions of FortiOS 4.3 maybe earlier. When you had multiple devices under an ADOM the policies and objects were clearly separated per device being managed. With the newer FortiOS it seems as though there is overlapping and my policies and objects seem to be cross contaminated between devices. What is your perspective on this and/or work around? Thank you in advance – Richard
I always keep my devices separated by Firmware version. ADOM 4.3 ADOM 5.2 ADOM 5.4 etc to keep things nice and neat.
I have an issue for deleting the V4.2 ADOMs from FMG V5.2 getting the below error.
Some ADOM(s) were not deleted successfully because they are not empty
But those ADOMs are not used anywhere. How to find out where it is used?
No admin accounts having access to the ADOM, No policy package for the ADOM.
Usually, it experiences this issue because something somewhere is still referencing it. Whether that item be a policy package as you mentioned before or a group etc.
Is there any possibilities to find out the references for that ADOM on the FMG.
Hi Mike,
We use fortimanager v5.4.1-build1082 160629 (GA) FMG-VM64 but we cant drag and drop within the rule base. (drag en drop from the object side plain does work) I have seen a instruction video were they lock the adom but also that future is non exsistent in our GUI.
You have any idea what this could be ? I did not see any issues on this subject on the fortinet site. We have upgraded from a older version FM.
kind regards and thanks for this great support site, i look here first!
Did you follow the supported upgrade path when you moved your FortiManager up through the code?
Not sure ( I was not involved and there is no change history) but i did found this in the “alert message console”
Upgrade image from v5.2.7-build0757-160408(GA) to v5.4.1-build1082-160629
Hello,
HELP !! we have multiple firewalls we would like to upload on our Fortimanager in the same ADOM.
The problem is that some objects have the same names but different IPs adresses. i read that the only solution is mapping the objects. if we do so we will have to it manually on every object (more than ~200) which is not an option for me. Can you please help me with this problem ?