Change Log
| Date | Change Description |
| 2017-06-08 | Initial release of FortiOS 5.4.5. |
| 2017-06-09 | Added 403937 to Resolved Issues.
Updated Upgrade Information > Upgrading to FortiOS 5.6.0. Updated 435124 in Known Issues. |
| 2017-06-13 | Removed 416678 from Known Issues.
Added 398052 to Resolved Issues. Added FGT-140 and FGT-140-POE to Introduction > Supported models > Special branch supported models. |
| 2017-06-15 | Added 399711, 421739, and 423452 to Resolved Issues. |
| 2017-06-26 | Added 389863 to Resolved Issues. |
| 2017-06-30 | Removed 374501 from Resolved Issues since that was resolved in 5.4.4.
In Product Integration and Support section, updated FortiClient support to 5.4.1 and later. |
| 2017-07-12 | Added 424215 to Known Issues. |
Introduction
This document provides the following information for FortiOS 5.4.5 build 1138:
| FortiGate | FG-30D, FG-30E, FG-30D-POE, FG-50E, FG-51E, FG-60D, FG-60D-POE, FG-70D,
FG-70D-POE, FG-80C, FG-80CM, FG-80D, FG-90D, FG-90D-POE, FG-92D, FG94D-POE, FG-98D-POE, FG-100D, FG-140D, FG-140D-POE, FG- 200D, FG-200DPOE, FG-240D, FG-240D-POE, FG-280D-POE, FG-300D, FG-400D, FG-500D, FG- 600C, FG-600D, FG-800C, FG-800D, FG-900D, FG-1000C, FG-1000D, FG-1200D, FG-1500D, FG-1500DT, FG-3000D, FG-3100D, FG-3200D, FG-3240C, FG-3600C, FG-3700D, FG-3700DX, FG-3800D, FG-3810D, FG-3815D, FG-5001C, FG-5001D |
| FortiWiFi | FWF-30D, FWF-30E, FWF-30D-POE, FWF-50E, FWF-51E, FWF-60D, FWF-60D-POE, FWF-80CM, FWF-81CM, FWF-90D, FWF-90D-POE |
| FortiGate Rugged | FGR-60D, FGR-90D |
| FortiGate VM | FG-SVM, FG-VM64, FG-VM64-AWS, FG-VM64-AWSONDEMAND, FG-VM64-HV, FG-VM64-KVM, FG-VMX, FG-VM64-XEN
FortiOS 5.4.5 supports the additional CPU cores through a license update on the following VM models: l VMware 16, 32, unlimited l KVM 16 l Hyper-V 16, 32, unlimited |
| Pay-as-you-go images | FOS-VM64, FOS-VM64-KVM |
| FortiOS Carrier | FortiOS Carrier 5.4.5 images are delivered upon request and are not available on the customer support firmware download page. |
l Special Notices l Upgrade Information l Product Integration and Support l Resolved Issues l Known Issues l Limitations
See the Fortinet Document Library for FortiOS documentation.
Supported models
FortiOS 5.4.5 supports the following models.
Introduction Supported models
Special branch supported models
The following models are released on a special branch of FortiOS 5.4.5. To confirm that you are running the correct build, run the CLI command get system status and check that the Branch point field shows 1138.
| FGR-30D | is released on build 7662. |
| FGR-35D | is released on build 7662. |
| FGR-30D-A | is released on build 7662. |
| FGT-30E-MI | is released on build 6229. |
| FGT-30E-MN | is released on build 6229. |
| FWF-30E-MI | is released on build 6229. |
| FWF-30E-MN | is released on build 6229. |
| FWF-50E-2R | is released on build 7657. |
| FGT-52E | is released on build 6226. |
| FGT-60E | is released on build 6225. |
| FWF-60E | is released on build 6225. |
| FGT-61E | is released on build 6225. |
| FWF-61E | is released on build 6225. |
| FGT-80E | is released on build 6225. |
| FGT-80E-POE | is released on build 6225. |
| FGT-81E | is released on build 6225. |
| FGT-81E-POE | is released on build 6225. |
| FGT-90E | is released on build 6230. |
| FGT-90E-POE | is released on build 6230. |
| FGT-91E | is released on build 6230. |
| FWF-92D | is released on build 7660. |
| FGT-100E | is released on build 6225. |
What’s new in FortiOS 5.4.5 Introduction
| FGT-100EF | is released on build 6225. |
| FGT-101E | is released on build 6225. |
| FGT-140E | is released on build 6257. |
| FGT-140E-POE | is released on build 6257. |
| FGT-200E | is released on build 6228. |
| FGT-201E | is released on build 6228. |
| FGT-2000E | is released on build 6227. |
| FGT-2500E | is released on build 6227. |
What’s new in FortiOS 5.4.5
For a detailed list of new features and enhancements that have been made in FortiOS 5.4.5, see the What’s New forFortiOS 5.4.5 document available in the Fortinet Document Library.
Special Notices
Built-In Certificate
FortiGate and FortiWiFi D-series and above have a built in Fortinet_Factory certificate that uses a 2048-bit certificate with the 14 DH group.
Default log setting change
For FG-5000 blades, log disk is disabled by default. It can only be enabled via CLI. For all 2U & 3U models (FG-3600/FG-3700/FG-3800), log disk is also disabled by default. For all 1U models and desktop models that supports SATA disk, log disk is enabled by default.
FortiAnalyzer Support
In version 5.4, encrypting logs between FortiGate and FortiAnalyzer is handled via SSL encryption. The IPsec option is no longer available and users should reconfigure in GUI or CLI to select the SSL encryption option as needed.
Removed SSL/HTTPS/SMTPS/IMAPS/POP3S
SSL/HTTPS/SMTPS/IMAPS/POP3S options were removed from server-load-balance on low end models below FG-100D except FG-80C and FG-80CM.
FortiGate and FortiWiFi-92D Hardware Limitation
FortiOS 5.4.0 reported an issue with the FG-92D model in the Special Notices > FG-92D High Availability in Interface Mode section of the release notes. Those issues, which were related to the use of port 1 through 14, include:
- PPPoE failing, HA failing to form l IPv6 packets being dropped l FortiSwitch devices failing to be discovered
- Spanning tree loops may result depending on the network topology
FG-92D and FWF-92D do not support STP. These issues have been improved in FortiOS 5.4.1, but with some side effects with the introduction of a new command, which is enabled by default:
config system global set hw-switch-ether-filter <enable | disable>
FG-900D and FG-1000D Special Notices
When the command is enabled:
- ARP (0x0806), IPv4 (0x0800), and VLAN (0x8100) packets are allowed l BPDUs are dropped and therefore no STP loop results l PPPoE packets are dropped l IPv6 packets are dropped l FortiSwitch devices are not discovered l HA may fail to form depending the network topology
When the command is disabled:
- All packet types are allowed, but depending on the network topology, an STP loop may result
FG-900D and FG-1000D
CAPWAP traffic will not offload if the ingress and egress traffic ports are on different NP6 chips. It will only offload if both ingress and egress ports belong to the same NP6 chip.
FG-3700DX
CAPWAP Tunnel over the GRE tunnel (CAPWAP + TP2 card) is not supported.
FortiGate units managed by FortiManager 5.0 or 5.2
Any FortiGate unit managed by FortiManager 5.0.0 or 5.2.0 may report installation failures on newly created VDOMs, or after a factory reset of the FortiGate unit even after a retrieve and re-import policy.
FortiClient Support
Only FortiClient 5.4.1 and later is supported with FortiOS 5.4.1 and later. Upgrade managed FortiClients to 5.4.1 or later before upgrading FortiGate to 5.4.1 or later.
Consider the FortiClient license before upgrading. Full featured FortiClient 5.2 and 5.4 licenses will carry over into FortiOS 5.4.1 and later. Depending on your organization’s needs, you might need to purchase a FortiClient EMS license for endpoint provisioning. Contact your sales representative for guidance on the appropriate licensing for your organization.
The perpetual FortiClient 5.0 license (including the 5.2 limited feature upgrade) will not carry over into FortiOS 5.4.1 and later. You need to purchase a new license for either FortiClient EMS or FortiGate. A license is compatible with 5.4.1 and later if the SKU begins with FC-10-C010.
Special Notices FortiClient (Mac OS X) SSL VPN Requirements
FortiClient (Mac OS X) SSL VPN Requirements
When using SSL VPN on Mac OS X 10.8, you must enable SSLv3 in FortiOS.
FortiGate-VM 5.4 for VMware ESXi
Upon upgrading to FortiOS 5.4.5, FortiGate-VM v5.4 for VMware ESXi (all models), no longer supports the VMXNET2 vNIC driver.
FortiClient Profile Changes
With introduction of the Cooperative Security Fabric in FortiOS, FortiClient profiles will be updated on FortiGate. FortiClient profiles and FortiGate are now primarily used for Endpoint Compliance, and FortiClient Enterprise Management Server (EMS) is now used for FortiClient deployment and provisioning.
In the FortiClient profile on FortiGate, when you set the Non-Compliance Action setting to Auto-Update, the
FortiClient profile supports limited provisioning for FortiClient features related to compliance, such as AntiVirus,
Web Filter, Vulnerability Scan, and Application Firewall. When you set the Non-Compliance Action setting to Block or Warn, you can also use FortiClient EMS to provision endpoints, if they require additional other features, such as VPN tunnels or other advanced options. For more information, see the FortiOS Handbook – Security
Profiles.
When you upgrade to FortiOS 5.4.1 and later, the FortiClient provisioning capability will no longer be available in FortiClient profiles on FortiGate. FortiGate will be used for endpoint compliance and Cooperative Security Fabric integration, and FortiClient Enterprise Management Server (EMS) should be used for creating custom FortiClient installers as well as deploying and provisioning FortiClient on endpoints. For more information on licensing of EMS, contact your sales representative.
FortiPresence
FortiPresence users must change the FortiGate web administration TLS version in order to allow the connections on all versions of TLS. Use the following CLI command.
config system global set admin-https-ssl-versions tlsv1-0 tlsv1-1 tlsv1-2
end
Log Disk Usage
Users are able to toggle disk usage between Logging and WAN Optimization for single disk FortiGates.
To view a list of supported FortiGate models, refer to the FortiOS 5.4.0 Feature Platform Matrix.
SSL VPN setting page Special Notices
SSL VPN setting page
The default server certificate has been changed to the Fortinet_Factory option. This excludes FortiGateVMs which remain at the self-signed option. For details on importing a CA signed certificate, please see the How to purchase and import a signed SSL certificate document.
FG-30E-3G4G and FWF-30E-3G4G MODEM Firmware Upgrade
The 3G4G MODEM firmware on the FG-30E-3G4G and FWF-30E-3G4G models may require updating. Upgrade instructions and the MODEM firmware have been uploaded to the Fortinet CustomerService & Support site.
Log in and go to Download > Firmware. In the Select Product list, select FortiGate, and click the Download tab. The upgrade instructions are in the following directory:
…/FortiGate/v5.00/5.4/Sierra-Wireless-3G4G-MODEM-Upgrade/
Use of dedicated management interfaces (mgmt1 and mgmt2)
For optimum stability, use management ports (mgmt1 and mgmt2) for management traffic only. Do not use management ports for general user traffic.
Upgrade Information
Upgrading to FortiOS 5.4.5
FortiOS version 5.4.5 officially supports upgrading from version 5.4.3 and later and 5.2.9 and later.
When upgrading from a firmware version beyond those mentioned in the Release Notes, a recommended guide for navigating the upgrade path can be found on the Fortinet documentation site.
There is a separate version of the guide describing the safest upgrade path to the latest patch of each of the supported versions of the firmware. To upgrade to this build, go to FortiOS 5.4 Supported Upgrade Paths.
Upgrading to FortiOS 5.6.0
Cooperative Security Fabric Upgrade
FortiOS 5.4.1 and later greatly increases the interoperability between other Fortinet products. This includes:
- FortiClient 5.4.1 and later l FortiClient EMS 1.0.1 and later l FortiAP 5.4.1 and later l FortiSwitch 3.4.2 and later
The upgrade of the firmware for each product must be completed in a precise order so the network connectivity is maintained without the need of manual steps. Customers must read the following two documents prior to upgrading any product in their network:
- Cooperative Security Fabric – Upgrade Guide
- FortiOS 5.4.x Upgrade Guide for Managed FortiSwitch Devices
This document is available in the Customer Support Firmware Images download directory for FortiSwitch 3.4.2.
FortiGate-VM 5.4 for VMware ESXi Upgrade Information
FortiGate-VM 5.4 for VMware ESXi
Upon upgrading to FortiOS 5.4.5, FortiGate-VM v5.4 for VMware ESXi (all models), no longer supports the VMXNET2 vNIC driver.
Downgrading to previous firmware versions
Downgrading to previous firmware versions results in configuration loss on all models. Only the following settings are retained:
l operation mode l interface IP/management IP l static route table l DNS settings l VDOM parameters/settings l admin user account l session helpers l system access profiles
When downgrading from 5.4 to 5.2, users will need to reformat the log disk.
Amazon AWS Enhanced Networking Compatibility Issue
Due to this new enhancement, there is a compatibility issue with older AWS VM versions. After downgrading a 5.4.1 or later image to an older version, network connectivity is lost. Since AWS does not provide console access, you cannot recover the downgraded image.
Downgrading to older versions from 5.4.1 or later running the enhanced nic driver is not allowed. The following AWS instances are affected:
- C3 l C4 l R3 l I2
- M4 l D2
Upgrade Information FortiGate VM firmware
FortiGate VM firmware
Fortinet provides FortiGate VM firmware images for the following virtual environments:
Citrix XenServer and Open Source XenServer
- .out: Download the 64-bit firmware image to upgrade your existing FortiGate VM installation.
- .out.OpenXen.zip: Download the 64-bit package for a new FortiGate VM installation. This package contains the QCOW2 file for Open Source XenServer.
- .out.CitrixXen.zip: Download the 64-bit package for a new FortiGate VM installation. This package contains the Citrix XenServer Virtual Appliance (XVA), Virtual Hard Disk (VHD), and OVF files.
Linux KVM
- .out: Download the 64-bit firmware image to upgrade your existing FortiGate VM installation.
- .out.kvm.zip: Download the 64-bit package for a new FortiGate VM installation. This package contains QCOW2 that can be used by qemu.
Microsoft Hyper-V
- .out: Download the 64-bit firmware image to upgrade your existing FortiGate VM installation.
- .out.hyperv.zip: Download the 64-bit package for a new FortiGate VM installation. This package contains three folders that can be imported by Hyper-V Manager on Hyper-V 2012. It also contains the file vhd in the Virtual Hard Disks folder that can be manually added to the Hyper-V Manager.
VMware ESX and ESXi
- .out: Download either the 64-bit firmware image to upgrade your existing FortiGate VM installation.
- .ovf.zip: Download either the 64-bit package for a new FortiGate VM installation. This package contains Open Virtualization Format (OVF) files for VMware and two Virtual Machine Disk Format (VMDK) files used by the OVF file during deployment.
Firmware image checksums
The MD5 checksums for all Fortinet software and firmware releases are available at the Customer Service & Support portal, https://support.fortinet.com. After logging in select Download > Firmware Image Checksums, enter the image file name including the extension, and select Get Checksum Code.
Product Integration and Support
FortiOS 5.4.5 support
The following table lists 5.4.5 product integration and support information:
| Web Browsers | l Microsoft Edge 38 l Microsoft Internet Explorer 11 l Mozilla Firefox version 53 l Google Chrome version 58 l Apple Safari version 9.1 (For Mac OS X)
Other web browsers may function correctly, but are not supported by Fortinet. |
| Explicit Web Proxy Browser | l Microsoft Edge 40 l Microsoft Internet Explorer 11 l Mozilla Firefox version 53 l Apple Safari version 10 (For Mac OS X) l Google Chrome version 58
Other web browsers may function correctly, but are not supported by Fortinet. |
| FortiManager | For the latest information, see the FortiManagerand FortiOS Compatibility.
You should upgrade your FortiManager prior to upgrading the FortiGate. |
| FortiAnalyzer | For the latest information, see the FortiAnalyzerand FortiOS Compatibility.
You should upgrade your FortiAnalyzer prior to upgrading the FortiGate. |
| FortiClient Microsoft
Windows and FortiClient Mac OS X |
l 5.4.1 and later
If FortiClient is being managed by a FortiGate, you must upgrade FortiClient before upgrading the FortiGate. |
| FortiClient iOS | l 5.4.1 and later |
| FortiClient Android and FortiClient VPN Android | l 5.4.0 and later |
FortiOS 5.4.5
| FortiAP | l 5.4.1 and later l 5.2.5 and later
Before upgrading FortiAP units, verify that you are running the current recommended FortiAP version. To do this in the GUI, go to the WiFi Controller> Managed Access Points > Managed FortiAP. If your FortiAP is not running the recommended version, the OS Version column displays the message: A recommended update is available. |
| FortiAP-S | l 5.4.1 and later |
| FortiSwitch OS
(FortiLink support) |
l 3.5.0 and later |
| FortiController | l 5.2.0 and later
Supported models: FCTL-5103B, FCTL-5903C, FCTL-5913C l 5.0.3 and later Supported model: FCTL-5103B |
| FortiSandbox | l 2.1.0 and later l 1.4.0 and later |
| Fortinet Single Sign-On (FSSO) | l 5.0 build 0256 and later (needed for FSSO agent support OU in group filters)
l Windows Server 2008 (32-bit and 64-bit) l Windows Server 2008 R2 64-bit l Windows Server 2012 Standard l Windows Server 2012 R2 Standard l Novell eDirectory 8.8 l 4.3 build 0164 (contact Support for download) l Windows Server 2003 R2 (32-bit and 64-bit) l Windows Server 2008 (32-bit and 64-bit) l Windows Server 2008 R2 64-bit l Windows Server 2012 Standard Edition l Windows Server 2012 R2 l Novell eDirectory 8.8 FSSO does not currently support IPv6. |
| FortiExplorer | l 2.6.0 and later.
Some FortiGate models may be supported on specific FortiExplorer versions. |
FortiOS 5.4.5 support Product Integration and Support
| FortiExplorer iOS | l 1.0.6 and later
Some FortiGate models may be supported on specific FortiExplorer iOS versions. |
| FortiExtender | l 3.0.0 l 2.0.2 and later |
| AV Engine | l 5.247 |
| IPS Engine | l 3.311 |
| Virtualization Environments | |
| Citrix | l XenServer version 5.6 Service Pack 2 l XenServer version 6.0 and later |
| Linux KVM | l RHEL 7.1/Ubuntu 12.04 and later l CentOS 6.4 (qemu 0.12.1) and later |
| Microsoft | l Hyper-V Server 2008 R2, 2012, 2012 R2, and 2016 |
| Open Source | l XenServer version 3.4.3 l XenServer version 4.1 and later |
| VMware | l ESX versions 4.0 and 4.1
l ESXi versions 4.0, 4.1, 5.0, 5.1, 5.5, 6.0, and 6.5 |
| VM Series – SR-IOV | The following NIC chipset cards are supported:
l Intel 82599 l Intel X540 l Intel X710/XL710 |
Language
Language support
The following table lists language support information.
Language support
| Language | GUI |
| English | ✔ |
| Chinese (Simplified) | ✔ |
| Chinese (Traditional) | ✔ |
| French | ✔ |
| Japanese | ✔ |
| Korean | ✔ |
| Portuguese (Brazil) | ✔ |
| Spanish (Spain) | ✔ |
SSL VPN support
SSL VPN standalone client
The following table lists SSL VPN tunnel client standalone installer for the following operating systems.
Operating system and installers
| Operating System | Installer |
| Linux CentOS 6.5 / 7 (32-bit & 64-bit)
Linux Ubuntu 16.04 |
2333. Download from the Fortinet Developer Network https://fndn.fortinet.net. |
Other operating systems may function correctly, but are not supported by Fortinet.
SSL VPN support Product Integration and Support
SSL VPN web mode
The following table lists the operating systems and web browsers supported by SSL VPN web mode.
| Product | Antivirus | Firewall | |
| Symantec Endpoint Protection 11 | ✔ | ✔ |
Supported operating systems and web browsers
| Operating System | Web Browser |
| Microsoft Windows 7 SP1 (32-bit & 64-bit)
Microsoft Windows 8 / 8.1 (32-bit & 64-bit) |
Microsoft Internet Explorer version 11
Mozilla Firefox version 53 Google Chrome version 58 |
| Microsoft Windows 10 (64-bit) | Microsoft Edge
Microsoft Internet Explorer version 11 Mozilla Firefox version 53 Google Chrome version 58 |
| Linux CentOS 6.5 / 7 (32-bit & 64-bit) | Mozilla Firefox version 53 |
| Mac OS 10.11.1 | Apple Safari version 9
Mozilla Firefox version 53 Google Chrome version 58 |
| iOS | Apple Safari
Mozilla Firefox Google Chrome |
| Android | Mozilla Firefox
Google Chrome |
Other operating systems and web browsers may function correctly, but are not supported by Fortinet.
SSL VPN host compatibility list
The following table lists the antivirus and firewall client software packages that are supported.
Supported Microsoft Windows XP antivirus and firewall software
SSL VPN
| Product | Antivirus | Firewall |
| Kaspersky Antivirus 2009 | ✔ | |
| McAfee Security Center 8.1 | ✔ | ✔ |
| Trend Micro Internet Security Pro | ✔ | ✔ |
| F-Secure Internet Security 2009 | ✔ | ✔ |
Supported Microsoft Windows 7 32-bit antivirus and firewall software
| Product | Antivirus | Firewall |
| CA Internet Security Suite Plus Software | ✔ | ✔ |
| AVG Internet Security 2011 | ✔ | ✔ |
| F-Secure Internet Security 2011 | ✔ | ✔ |
| Kaspersky Internet Security 2011 | ✔ | ✔ |
| McAfee Internet Security 2011 | ✔ | ✔ |
| Norton 360™ Version 4.0 | ✔ | ✔ |
| Norton™ Internet Security 2011 | ✔ | ✔ |
| Panda Internet Security 2011 | ✔ | ✔ |
| Sophos Security Suite | ✔ | ✔ |
| Trend Micro Titanium Internet Security | ✔ | ✔ |
| ZoneAlarm Security Suite | ✔ | ✔ |
| Symantec Endpoint Protection Small Business Edition 12.0 | ✔ | ✔ |
Resolved Issues
The following issues have been fixed in version 5.4.5. For inquires about a particular bug, please contact CustomerService & Support.
AntiVirus
| Bug ID | Description |
| 392200 | Encrypted archive log is generated even though the function archive-log in antivirus profile is unset. |
DLP
| Bug ID | Description |
| 379911 | DLP filter order is not applied to encrypted files. |
Firewall
| Bug ID | Description |
| 304276 | Policy real time view shows incorrect statistic in session offload to np6. |
| 378482 | TCP/UDP traffic fais when NAT/UTM is enabled on FGT-VM in KVM. |
| 395241 | After IPS is enabled on LB-VIP policy, this message displays: ipsapp session open failed: all providers busy. |
| 402158 | Some policy settings are not installed in complex sessions. |
| 416111 | FQDN address is unresolved in a VDOM although the URL is resolved with IP. |
GUI
| Bug ID | Description |
| 283682 | Cannot delete FSSO-polling AD group from LDAP list tree window in FSSO-user GUI. |
| 356998 | urlfilter list re-order on GUI does not work. |
| 371149 | 30D GUI should support FortiSwitch controller feature when CLI supports it. |
| 372898 | User group name should escape XSS script at UserGroups page. |
| Bug ID | Description |
| 374166 | Using Edge cannot select the firewall address when configuring a static route. |
| 374350 | Field pre-shared key may be unavailable when editing the IPsec dialup tunnel created through the VPN wizard. |
| 378428 | FortiGate logs a connection of category deny (red sign) even though traffic is allowed through policy. |
| 379331 | DHCP Monitor page does not fully display the page selector pane. |
| 384532 | Cannot set IPsec vpn xauth user group inherit from policy in GUI when setting xauthtype auto server. |
| 385482 | Webui loads indefinitely when accessing a none access webpage from custom admin profile. |
| 386285 | GUI Wizard fails to create FortiClient Dialup IPsec VPN if HA is enabled. |
| 386849 | When editing IPsec tunnel, Accessible Networks field cannot load if there is nested address group. |
| 387640 | Duplicate entry found when auto generate guest user. |
| 388454 | GUI failures when FSSO group contains an apostrophe. |
| 394067 | Improve displaying the warning: File System Check Recommended. |
| 395711 | pyfcgid takes 100% of CPU when managed switch page displayed. |
| 396430 | CSRF token is disclosed in several URLs. |
| 401247 | Cannot nest service group within another service group through GUI. |
| 409104 | Fix virtual-wire wildcard VLANs not handling u-turn traffic properly. |
| 421918 | HTTPSD debug improvement. |
HA
| Bug ID | Description |
| 373200 | Quick failover occurs when enabling portmonitor. |
| 382798 | Master unit delay in sending heartbeat packet. |
| 386434 | HA configuration and VLAN interface disappear from config after reboot. |
| Bug ID | Description |
| 396938 | Reboot of FGT HA cluster member with redundant HA management interface deletes HA configuration. |
| 397171 | FIB of VDOMs in vcluster2 is not synced to the slave. |
| 404736 | SCTP synchronized sessions in HA cluster, when one reboots the master, the traffic is interrupted. |
| 404874 | Some commands for HA in diag debug report and exec tac report need to be updated. |
| 408167 | Heartbeat packets broadcast out of ports not configured as HB ports, even though the HB ports are directly connected. |
| Bug ID | Description |
| 377255 | Can’t read UTM details on log panel when set location to FortiAnalyzer. |
| 377733 | Results/Deny All filter does not return all required/expected data. |
IPsec VPN
| Bug ID | Description |
| 356330 | Cross NP6-Chip IPsec traffic does not work in SLBC environment. |
| 374326 | Accept type: Any peerID may be unavailable when creating a IPsec dialup tunnel with a pre-shared key and ikev1 in main mode. |
| 386802 | Unable to establish phase 2 when using address group/group object as quick mode selectors. |
| 392097 | 3DES encryption susceptible to Sweet32 attack. |
| 395044 | OSPF over IPsec IKEv2 with dialup tunnel does not work as for IKEv1. |
| 397386 | Slave worker blades attempt to establish site to site IPsec VPN tunnel. |
| 409050 | unregister_netdevice messages appears on console when CAPWAP message is transmitted over IPsec tunnel. |
| 411682 | ADVPN failover does not update rtcache entry. |
| 412987 | IPsec VPN certificate not validated against PKI user’s CN and Subject. |
Logging & Report
| Bug ID | Description |
| 386742 | Missing deny traffic log when user traffic is blocked by NAC quarantine. |
| 397702 | Add kernel related log messages for protocol attacks. |
| 397714 | Need a fill log disk utility to assist with CC testing. |
| 398802 | Forward traffic log shows dstintf=unknown-0 after enabling antivirus. |
| 401511 | FortiGate Local Report showing incorrect Malware Victims and Malware Sources. |
| 402712 | Username truncated in Webfilter & DLP logs. |
| 406071 | DNS filtering shows error: all Fortiguard SDNS servers failed to respond. |
| 417128 | Syslog message are missed in Fortigate. |
| 421062 | FortiGate 60E stopped sending logs to FortiAnalyzer when reliable enabled. |
Router
| Bug ID | Description |
| 373892 | ECMP(BGP) routing failover time. |
| 374306 | Number of concurrent sessions affect the convergence time after HA failover. |
| 383013 | Message ha_fib_rtnl_hdl: msg truncated, increase buf size showing up on console. |
| 385264 | AS-override has not been applied in multihop AS path condition. |
| 392250 | BGP session not establishing with Cisco Nexus. |
| 393623 | Policy routing change not is not reflected. |
| 397087 | VRIP cannot be reached on 51E when it is acting as VRRP master. |
| 399415 | Local destined IPv6 traffic matched by PBR. |
| 405408 | FortiGate creates corrupted OSPF LS Update packet when certain number of networks is propagated. |
| 421151 | ICMP redirect received in root affects another VDOM’s route gateway selection. |
SSL VPN
| Bug ID | Description |
| 370986 | SSL VPN LDAP user password renew doesn’t work when two factor authentication is enabled. |
| 375827 | SSL VPN web mode get Access denied to FOS 5.4.1 GA B1064 under VDOM. |
| 375894 | SSL VPN web mode access FMG B1066/FAZ B1066 error. |
| 387276 | SSL VPN should support Windows 10 OS check. |
| 389566 | “AltGr” key does not work when connecting to RDP-TLS server through SSL VPN web portal from IE 11. |
| 394272 | SSL VPN proxy mode can’t proxy some web server URL normally. |
| 395497 | https-redirect for SSL VPN does not support realms. |
| 396932 | Some web sites not working over web SSL VPN. |
| 399711 | SSL VPN does not decode hostcheck string properly for latest FortiClient. |
| 399784 | URL modified incorrectly for a dropdown in application server. |
| 402743 | User peer causes SSL VPN access failure even though user group has no user peer. |
| 405799 | AV breaks login to OWA via SSL VPN web mode. |
| 406028 | Citrix with Xenapp 7.x not working via SSL VPN web portal. |
| 408624 | SSL VPN certificate UPN+LDAP authentication works only on first policy. |
| 423452 | Citrix Xenapp not working properly via SSL VPN web portal. |
System
| Bug ID | Description |
| 182287 | Implementation for check_daemon_enable() is not efficient. |
| 283952 | VLAN interface Rx bytes statistics higher than underlying aggregate interface. |
| 302722 | Using CLI #get system hardware status makes CLI hang. |
| 306041 | SSH error Broken pipe on client when using remote forwarding and SSH deep packet option log port fwd is enabled. |
| Bug ID | Description |
| 354490 | False positive sensor alarms in Event log. |
| 355256 | After reassigning a hardware switch to a TP-mode VDOM, bridge table does not learn MAC addresses until after a reboot. |
| 375798 | Multihoming SCTP sessions are not correctly offloaded. |
| 376423 | Sniffer is not able to capture ICMPv6 packets with Hop-by-Hop option when using filter icmp6. |
| 377192 | DHCP request after lease expires is sent with former unicast IP instead of 0.0.0.0 as source. |
| 378364 | L2TP over IPsec tunnel cannot be established in FortiGate VM. |
| 379883 | Link-monitor doesn’t remove the route when it is in “die” state. |
| 381363 | Empty username with Radius 802.1x WSSO authentication. |
| 382657 | ICMP Packets bigger than 1418 bytes are dropped when offloading for IPsec tunnel is enabled.
Affected models: FG-30D, FG-60D, FG-70D, FG-90D, FG-90D-POE, FG-94D, FG-98D, FG-200D, FG-200D-POE, FG-240D, FG-240D-POE, FG-280D-POE, FWF-30D, FWF-60D, FWF-90D, FWF-90D-POE. |
| 383126 | 50E/51E TP mode – STP BPDU forwarding destined to 01:80:c2:00:00:00 has stopped after warm/cold reboot. |
| 385455 | Inconsistent trusted host behavior. |
| 385903 | Changing allowedaccess on FG-200D hardware switch interfaces causes hard-switch to stop functioning. |
| 386271 | On FWF-90D after enabling IPS sensor with custom sig, in 60% chance need to wait for 30+ seconds to let ping packet pass. |
| 386395 | Missing admin name in system event log related to admin NAC quarantine. |
| 388971 | Insufficient guard queue size when sending files to FSA. |
| 389407 | High memory usage for radvd process. |
| 389711 | Suggest asic_pkts/asic_bytes counter in diagnose firewall iprope show should remain after FortiGate reboot. |
| 391168 | Delayed Gratuitous ARP during SLBC Chassis Fail-back. |
| 391460 | FortiGuard Filtering Services Availability check is forever loading. |
| Bug ID | Description |
| 392655 | Conserve mode – 4096 SLAB leak suspected. |
| 393275 | VDOM admin forced change password while there is other login session gets The name is a reserved keyword by the system. |
| 393343 | Remove botnet filter option if interface role is set to LAN. |
| 394775 | GUI not behaving properly after successful upload of FTK200CD file. |
| 395039 | Loopback interface: Debug Flow and logs do not show the usage of firewall policy ID. |
| 396018 | Backup slave member of a redundant interface accept and process incoming traffic. |
| 397984 | SLBC – FIB sync may fail if there is a large routing table update. |
| 398852 | UDP jumbo frames arrives fragmented on a 3600C are blocked when acceleration is enabled. |
| 399364 | VDOM config restore fails for GRE interface bound to IPsec VPN interface. |
| 399648 | LAN ports status is up after reboot even if administrative status is down on FG-30D. |
| 400907 | Ethernet Ports Activity LED doesn’t light for shared copper ports. |
| 401360 | LDAP group query failed when the fixed length buffer overflows. |
| 402742 | VDOM list page does not load. |
| 403532 | FG-100D respond fragmented ICMP request with non-fragmented reply right after factory reset. |
| 403724 | Real number of FortiToken supported doesn’t match tablesize on some platforms. |
| 403937 | High memory on VSD. |
| 404258 | L2TP second user cannot connect to FG-600D via a router (NAPT). |
| 404480 | Link-monitor is not detecting the server once it becomes available. |
| 405234 | Unable to load application control replacement message logo and image in explicit proxy (HTTPS). |
| 405757 | Interface link not coming up when FortiGate interface is set to 1000full. |
| 406071 | DNS Filtering showing error all Fortiguard SDNS servers failed to respond. |
| Bug ID | Description |
| 406519 | Administrative users assigned to prof_admin profile do not have access to diagnose CLI command. |
| 406689 | Autoupdate schedule time is reset after rebooting. |
| 406972 | Device become unresponsive for 30 min. during IPS update when cfg-save option is set to manual. |
| 409828 | Cisco switches don’t discover FortiGate using LLDP on internalX ports. |
| 410463 | SNMP is not responding when queried on a loopback IP address with an asymmetric SNMP packet path. |
| 410901 | PKI peer CA search stops on first match based on CA subject name. |
| 411432 | scanunitd gets high CPU when making configuration changes. |
| 411433 | voipd shows high CPU when making configuration changes. |
| 411685 | If IPPool is enabled in the firewall policy, offloaded traffic to NP6 is encrypted with a wrong SPI. |
| 414243 | DNS Filter local FortiGuard SDNS servers failed to respond due to malformed packet. |
| 416678 | FG101E/100E has reports of firewall lockups in production. |
| 418205 | High CPU utilization after upgrade from FortiOS 5.2.10 to 5.4.4. |
| 420170 | Skip the rating for dynamic DNS update type queries. |
Web Filter
| Bug ID | Description |
| 188128 | For the Flowbase web filter, the CLI command set https-replacemsg disable does not work. |
WebProxy
| Bug ID | Description |
| 376808 | Explicit proxy PAC File distribution in FortiOS 5.4.x not working properly. |
| 383817 | WAD crashes with a signal 11 (segmentation fault) in wad_port_fwd_peer_shutdown and wad_http_session_task_end. |
| 389863 | Signal 11 WAD and HTTPSD processes, and GUI not accessible. |
| Bug ID | Description |
| 398052 | WAD session leak. |
| 398405 | WAD crashes without backtrace. |
| 400454 | Improve WAD debug trace and crash log information. |
| 402155 | WAS crashes with signal 6 in wad_authenticated_user_authenticate after upgrade to 5.4.3. |
| 402778 | WAD does not authorize user if it belongs to more than 256 usergroups with Kerberos authentication. |
| 405264 | WAD crash when flush FTP over HTTP traffic. |
| 408503 | Cannot access websites when SSL Inspection is set to Inspect All Ports with Proxy Option enabled only for HTTP(ANY). |
| 412462 | Fortinet-Bar does not show up on iPhone with iOS 10.2.1 Safari and Google Chrome 57.0.2987.100. |
| 415918 | Explicit proxy users are disconnected once a VDOM is created / removed. |
| 421092 | WAD consuming memory when explicit webproxy is used. |
WiFi
| Bug ID | Description |
| 387146 | Wireless client RSSO authentication fails after reconnection to AP. |
Common Vulnerabilities and Exposures
FortiOS 5.4.5 is no longer vulnerable to the following CVE references. For more information, see https://fortiguard.com/psirt.
| Bug ID | CVE references |
| 421739 | l CVE-2017-7734 l CVE-2017-7735 |
Known Issues
The following issues have been identified in version 5.4.5. For inquires about a particular bug or to report a bug, please contact CustomerService & Support.
AntiVirus
| Bug ID | Description |
| 374969 | FortiSandbox FortiView may not correctly parse the FSA v2.21 tracer file(.json). |
| Bug ID | Description |
| 304199 | Using HA with FortiLink can encounter traffic loss during failover. |
Endpoint Control
| Bug ID | Description |
| 374855 | Third party compliance may not be reported if FortiClient has no AV feature. |
| 375149 | FortiGate does not auto update AV signature version while Endpoint Control is enabled. |
| 391537 | Buffer size is too small when sending large vulnerability list to FortiGate. |
Firewall
| Bug ID | Description |
| 364589 | LB VIP slow access when cookie persistence is enabled. |
FortiGate-3815D
| Bug ID | Description |
| 385860 | FortiGate-3815D does not support 1GE SFP transceivers. |
FortiRugged-60D
| Bug ID | Description |
| 375246 | invalid hbdev dmz may be received if the default hbdev is used. |
FortiSwitch-Controller/FortiLink
| Bug ID | Description |
| 357360 | DHCP snooping may not work on IPv6. |
| 369099 | FortiSwitch authorizes successfully but fails to pass traffic until you reboot FortiSwitch. |
| 374346 | Adding or reducing stacking connections may block traffic for 20 seconds. |
FortiView
| Bug ID | Description |
| 368644 | Physical Topology: Physical Connection of stacked FortiSwitch may be incorrect. |
| 372350 | Threat view: Threat Type and Event information is missing in the last level of the threat view. |
| 372897 | Invalid -4 and invalid 254 is shown as the submitted file status. |
| 373142 | Threat: Filter result may not be correct when adding a filter on a threat and threat type on the first level. |
| 375172 | FortiGate under a FortiSwitch may be shown directly connected to an upstream FortiGate. |
| 375187 | Using realtime auto update may increase chrome browser memory usage. |
GUI
| Bug ID | Description |
| 289297 | Threat map may not be fully displayed when screen resolution is not big enough. |
| 297832 | Administrator with read-write permission for Firewall Configuration is not able to read or write firewall policies. |
| 355388 | The Select window for remote server in remote user group may not work as expected. |
| 365223 | CSF: downstream FGT may be shown twice when it uses hardware switch to connect upstream. |
| 365317 | Unable to add new AD group in second FSSO local polling agent. |
| 365378 | You may not be able to assign ha-mgmt-interface IP address in the same subnet as another port from the GUI. |
| 368069 | Cannot select wan-load-balance or members for incoming interface of IPsec tunnel. |
| 369155 | There is no Archived Data tab for email attachment in the DLP log detail page. |
Known Issues
| Bug ID | Description | |||
| 372908 | The interface tooltip keeps loading the VLAN interface when its physical interface is in another VDOM. | |||
| 372943 | Explicit proxy policy may show a blank for default authentication method. | |||
| 374081 | wan-load-balance interface may be shown in the address associated interface list. | |||
| 374162 | GUI may show the modem status as Active in the Monitor page after setting the modem to disable. | |||
| 374224 | The Ominiselect widget and Tooltip keep loading when clicking a newly created object in the Firewall Policy page. | |||
| 374320 | Editing a user from the Policy list page may redirect to an empty user edit page. | |||
| 374322 | Interfaces page may display the wrong MAC Address for the hardware switch. | |||
| 374373 | Policy View: Filter bar may display the IPv4 policy name for the IPv6 policy. | |||
| 374397 | Should only list any as destination interface when creating an explicit proxy in the TP VDOM. | |||
| 374521 | Unable to Revert revisions in GUI. | |||
| 374525 | When activating the FortiCloud/Register-FortiGate, clicking OK may not work the first time. | |||
| 375346 | You may not be able to download the application control packet capture from the forward traffic log. | |||
| 373363 | Multicast policy interface may list the wan-load-balance interface. | |||
| 373546 | Only 50 security logs may be displayed in the Log Details pane when more than 50 are triggered. | |||
| 374363 | Selecting Connect to CLI from managed FAP context menu may not connect to FortiAP. | |||
| 375036 | The Archived Data in the SnifferTraffic log may not display detailed content and download. | |||
| 375227 | You may be able to open the dropdown box and add new profiles even though errors occur when editing a Firewall Policy page. | |||
| 375259 | Addrgrp editing page receives a js error if addrgrp contains another group object. | |||
| 375369 | May not be able to change IPsec manualkey config in GUI. | |||
| 375383 | Policy list page may receive a js error when clicking the search box if the policy includes wan-load-balance interface. | |||
| Bug ID | Description | |||
| 379050 | User Definition intermittently not showing assigned token. | |||
| 421423 | Cannot download certificate in Security Profiles > SSL/SSH Inspection. Workaround: Go to System > Certificates to download. | |||
HA
| Bug ID | Description |
| 399115 | ID for the new policy (when using edit 0) is different on master and on slave unit. |
IPsec
| Bug ID | Description |
| 393958 | Shellshock attack succeeds when FGT is configured with server-cert-mode replace and an attacker uses rsa_3des_sha. |
| 435124 | Cannot establish IPsec phase1 tunnel after upgrading from version 5.4.5 to 5.6.0.
Workaround: After upgrading to 5.6.0, reconfigure all IPsec phase1 psksecret settings. |
Router
| Bug ID | Description |
| 299490 | During and after failover, some multicast groups take up to 480 seconds to recover. |
SSL VPN
| Bug ID | Description |
| 303661 | The Start Tunnel feature may have been removed. |
| 304528 | SSL VPN Web Mode PKI user might immediately log back in even after logging out. |
| 374644 | SSL VPN tunnel mode Fortinet bar may not be displayed. |
| 375137 | SSL VPN bookmarks may be accessible after accessing more than ten bookmarks in web mode. |
| 382223 | SMB/CIFS bookmark in SSL VPN portal doesn’t work with DFS Microsoft file server error “Invalid HTTP request”. |
Known Issues
System
| Bug ID | Description |
| 284512 | When using the Dashboard Interface History widget, the httpds process uses excessive memory and then crashes. |
| 287612 | Span function of software switch may not work on FortiGate-51E/FortiGate-30E. |
| 290708 | nturbo may not support CAPWAP traffic. |
| 295292 | If private-data-encryption is enabled, when restoring config to a FortiGate, the FortiGate may not prompt the user to enter the key. |
| 304199 | FortiLink traffic is lost in HA mode. |
| 364280 | User cannot use ssh-dss algorithm to log in to FortiGate via SSH. |
| 371320 | show system interface may not show the Port list in sequential order. |
| 372717 | Option admin-https-banned-cipher in sys global may not work as expected. |
| 392960 | FOS support for V4 BIOS. |
| 424215 | FG-80C halts during boot after upgrade from 5.2.10 to 5.4.4. |
Upgrade
| Bug ID | Description |
| 269799 | Sniffer config may be lost after upgrade. |
| 289491 | When upgrading from 5.2.x to 5.4.0, port-pair configuration may be lost if the port-pair name exceeds 12 characters. |
Visibility
| Bug ID | Description |
| 374138 | FortiGate device with VIP configured may be put under Router/NAT devices because of an address change. |
VM
| Bug ID | Description |
| 364280 | ssh-dss may not work on FGT-VM-LENC. |
WiFi
| Bug ID | Description |
| 434991 | WTP tablesize limitation cause WTP entry to be lost after upgrade from v5.4.4 to 5.4.5.
Affected models: FG-30D, FG-30D-POE, FG-30E, FWF-30D, FWF-30D-POE, FWF-30E. |
Limitations
Citrix XenServer limitations
The following limitations apply to Citrix XenServer installations:
- XenTools installation is not supported.
- FortiGate-VM can be imported or deployed in only the following three formats:
- XVA (recommended) l VHD l OVF
- The XVA format comes pre-configured with default configurations for VM name, virtual CPU, memory, and virtual NIC. Other formats will require manual configuration before the first power on process.
Open Source XenServer limitations
When using Linux Ubuntu version 11.10, XenServer version 4.1.0, and libvir version 0.9.2, importing issues may arise when using the QCOW2 format and existing HDA issues.
