Configuring SIP IP address conservation for the SIP session helper

Configuring SIP IP address conservation for the SIP session helper

You can use the following command to enable or disable SIP IP address conservation for the SIP session helper. IP address conservation is enabled by default for the SIP session helper.

config system settings set sip-nat-trace disable

end

If the SIP message does not include an i= line and if the original source IP address of the traffic (before NAT) was 10.31.101.20 then the FortiGate would add the following i= line.

i=(o=IN IP4 10.31.101.20)


Having trouble configuring your Fortinet hardware or have some questions you need answered? Ask your questions in the comments below!!! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Don't Forget To Buy Your Fortinet Hardware From The Fortinet GURU

Leave a Reply

Name *
Email *
Website

This site uses Akismet to reduce spam. Learn how your comment data is processed.