Agent-based FSSO

Configuring FSSO with Novell networks

You need to configure the eDirectory agent for it to communicate with eDirectory servers. You may have provided some of this information during installation.

This section includes:

l Configuring the eDirectory agent l Adding an eDirectory server l Configuring a group filter

Configuring the eDirectory agent

You need to configure the eDirectory agent for it to communicate with eDirectory servers.

with Novell networks

To configure the eDirectory agent:

  1. From the Start menu select Programs > Fortinet > eDirectory Agent > eDirectory Config Utility.
  2. The eDirectory Agent Configuration Utility dialog opens. Enter the following information and select OK.
eDirectory Authentication
Username Enter a username that has access to the eDirectory, using LDAP format.
Password Enter the password.
Listening port Enter the TCP port on which Fortinet Single Sign On Agent listens for connections from FortiGate units. The default is 8000. You can change the port if necessary.
Refresh interval Enter the interval in seconds between polls of the eDirectory server to check for new logons. The default is 30 seconds.
FortiGate Connection Authentication
Require authenticated Select to require the FortiGate unit to authenticate before connecting to connection from FortiGate the eDirectory Agent.
Password                               Enter the password that FortiGate units must use to authenticate. The maximum password length is 16 characters. The default password is “FortinetCanada”.
User logon Info Search           Select how the eDirectory agent accesses user logon information: LDAP or

Method                                    Native (Novell API). LDAP is the default.

If you select Native, you must also have the Novell Client installed on the PC.

Logging
Log file size limit (MB) Enter the maximum size for the log file in MB.
View Log View the current log file.
Dump Session List the currently logged-on users in the log file. This can be useful for troubleshooting.
Log level Select Debug, Info, Warning or Error as the minimum severity level of message to log or select None to disable logging.
eDirectory Server List
Add Add an eDirectory server. See Adding an eDirectory server on page 170.
Delete Delete the selected eDirectory server.

Configuring FSSO with Novell networks

eDirectory Server List
Edit Modify the settings for the selected server.
Set Group Filters… Select the user groups whose user logons will be reported to the FortiGate unit. This is used only if user groups are not selected on the FortiGate unit.

Adding an eDirectory server

Once the eDirectory agent is configured, you add one or more eDirectory servers.

To add an eDirectory server:

  1. In the eDirectory Agent Configuration Utility dialog box (see the preceding procedure, Configuring the eDirectory agent), select Add.
  2. The eDirectory Setup dialog box opens. Enter the following information and select OK:
eDirectory Server Address Enter the IP address of the eDirectory server.
Port If the eDirectory server does not use the default port 389, clear the Default check box and enter the port number.
Use default credential Select to use the credentials specified in the eDirectory Configuration Utility. See Configuring the eDirectory agent on page 168. Otherwise, leave the check box clear and enter a username and Password below.
User name Enter a username that has access to the eDirectory, using LDAP format.
User password Enter the password.
Use secure connection (SSL) Select to connect to the eDirectory server using SSL security.
Search Base DN Enter the base Distinguished Name for the user search.

Configuring a group filter

The eDirectory agent sends user logon information to the FortiGate unit for all user groups unless you either configure an LDAP server entry for the eDirectory on the FortiGate unit and select the groups that you want to monitor or configure the group filter on the eDirectory agent.

If both the FortiGate LDAP configuration and the eDirectory agent group filter are present, the FortiGate user group selections are used.

To configure the group filter:

  1. From the Start menu select Programs > Fortinet > eDirectory Agent > eDirectory Config Utility.
  2. Select Set Group Filters.
  3. Do one of the following:

l Enter group names, then select Add. l Select Advanced, select groups, and then select Add.

Advanced Settings

  1. Select OK.


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

This entry was posted in FortiGate, FortiOS 5.6 on by .

About Mike

Michael Pruett, CISSP has a wide range of cyber-security and network engineering expertise. The plethora of vendors that resell hardware but have zero engineering knowledge resulting in the wrong hardware or configuration being deployed is a major pet peeve of Michael's. This site was started in an effort to spread information while providing the option of quality consulting services at a much lower price than Fortinet Professional Services. Owns PacketLlama.Com (Fortinet Hardware Sales) and Office Of The CISO, LLC (Cybersecurity consulting firm).

One thought on “Agent-based FSSO

  1. Stewart Myles

    Thanks I find your site useful, I have followed these instructions and we have a issue where users are not detected by the Fortinet agent if they move from wireless to LAN and vice versa, also if user come out of sleep mode they won’t have any internet, any ideas were to look?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.