Configuring Routers and Switches
AccelOps supports these routers and switches for discovery and monitoring.
Alcatel TiMOS and AOS Switch Configuration
Arista Router and Switch Configuration
Brocade NetIron CER Routers
Cisco 300 Series Routers
Cisco IOS Router and Switch Configuration
How CPU and Memory Utilization is Collected for Cisco IOS
Cisco Meraki Cloud Controller and Network Devices Configuration
Cisco NX-OS Router and Switch Configuration
Cisco ONS Configuration
Dell Force10 Router and Switch Configuration
Dell NSeries Switch Configuration
Dell PowerConnect Switch and Router Configuration
Foundry Networks IronWare Router and Switch Configuration
HP/3Com ComWare Switch Configuration
HP ProCurve Switch Configuration
HP Value Series (19xx) and HP 3Com (29xx) Switch Configuration
Juniper Networks JunOS Switch Configuration
Mikrotek Router Configuration
Nortel ERS and Passport Switch Configuration
Alcatel TiMOS and AOS Switch Configuration
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for | |
| SNMP
(V1, V2c) |
Host name, Software version, Hardware model, Network interfaces, | Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability and
Performance Monitoring |
|
| SNMP
(V1, V2c) |
Hardware status: Power Supply, Fan, Temperature | Availability | ||
| SNMP (V1, V2c,
V3) |
Layer 2 port mapping: associating switch ports to directly connected host IP/MAC addresses | Identity and location table; Topology |
Event Types
In CMDB > Event Types, search for “alcatel” in the Device Type and Description columns to see the event types associated with this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Settings for Access Credentials
Arista Router and Switch Configuration
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP (V1,
V2c) |
Host name, Serial number, Software version, Hardware model, Network interfaces, Hardware Components | Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), CPU utilization, Memory utilization, Flash utilization, Hardware Status | Availability and
Performance Monitoring |
| Telnet/SSH | Running and Startup configurations | Startup Configuration Change, Difference between Running and Startup configurations | Change
monitoring |
Event Types
There are no event types defined specifically for this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
Telnet/SSH
AccelOps uses Telnet/SSH to communicate with this device. Refer to the product documentation for your device to enable Telnet/SSH.
These commands are used for discovery and performance monitoring via SSH. Please make sure that the access credentials you provide in AccelOps have the permissions necessary to execute these commands on the device.
- show startup-config
- show running-config
- show version
- show ip route
- enable
- terminal pager 0
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation.
You can now configure AccelOps to communicate with your device by following the instructions in Setting Access Credentials for Device Discovery, and then initiate discovery of the device as described in the topics in Discovering Infrastructure.
Settings for Access Credentials
Brocade NetIron CER Routers
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP
(V1, V2c) |
Host name, software version, Hardware model, Network interfaces | CPU, Memory, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), Hardware Status, Real Server
Status |
Availability and
Performance Monitoring |
Event Types
There are no event types defined specifically for this device.
Rules
There are no predefined rules specifically for this device.
Reports
There are no predefined reports specifically for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Settings for Access Credentials
Cisco 300 Series Routers
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP
(V1, V2c) |
Host name, software version, Hardware model, Network interfaces | Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability and
Performance Monitoring |
Event Types
There are no event types defined specifically for this device.
Rules
There are no predefined rules specifically for this device.
Reports
There are no predefined reports specifically for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Settings for Access Credentials
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP (V1,
V2c, V3) |
Host name, IOS version, Hardware model, Memory size, Network interface details – name, address, mask and description | Uptime, CPU and Memory utilization, Free processor and I/O memory, Free contiguous processor and I/O memory, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), | Availability
and Performance Monitoring |
| SNMP (V1,
V2c, V3) |
Hardware component details: serial number, model, manufacturer, software firmware versions of hardware components such as chassis, CPU, fan, power supply, network cards etc. | Hardware health: temperature, fan and power supply | Availability |
| SNMP (V1,
V2c, V3) |
Trunk port connectivity between switches and VLANs carried over a trunk port, End host Layer 2 port mapping: switch interface to VLAN id, end host IP/MAC address association | Topology and end-host location | |
| SNMP (V1,
V2c, V3) |
BGP connectivity, neighbors, state, AS number | BGP state change | Routing
Topology, Availability Monitoring |
| SNMP (V1,
V2c, V3) |
OSPF connectivity, neighbors, state,
OSPF Area |
OSPF state change | Routing
Topology, Availability Monitoring |
| SNMP (V1,
V2c, V3) |
IP SLA and VoIP performance metrics: Max/Min/Avg Delay and Jitter – both overall and Source->Destination and Destination->Source, Packets Lost – both overall and Source->Destination and Destination->Source, Packets Missing in Action, Packets
Late, Packets out of sequence, VoIP Mean Opinion Score (MOS), VoIP Calculated Planning Impairment Factor (ICPIF) score |
VoIP
Performance Monitoring |
|
| SNMP (V1,
V2c, V3) |
Class based QoS metrics (from CISCO-CLASS-BASED-QOS-MIB): For (router interface, policy, class map) tuple: class map metrics including Pre-policy rate, post-police rate, drop rate and drop pct; police action metrics including conform rate, exceeded rate and violated rate; queue metrics including current queue length, max queue length and discarded packets | QoS
performance monitoring |
|
| SNMP (V1,
V2c, V3) |
NBAR metrics (from CISCO-NBAR-PROTOCOL-DISCOVERY-MIB): For each
interface and application, sent/receive flows, sent/receive bytes, sent/receive bits/sec |
Performance
Monitoring |
|
| Telnet/SSH | Running and startup configuration,
Image file name, Flash memory size, Running processes |
Startup configuration change, delta between running and startup configuration, Running process CPU and memory utilization | Performance
Monitoring, Security and Compliance |
| Syslog | Device type | System logs and traffic logs matching acl statements | Availability,
Security and Compliance |
Event Types
Performance Monitoring events
Configuration change events
Syslog events
In CMDB > Event Types, search for “cisco_os” in the Description column to see the event types associated with this device.
Rules
Performance Monitoring rules
Configuration change rules
Other rules
Reports
Performance Monitoring Reports
Configuration change Reports
Other Reports
Configuration
Telnet/SSH
AccelOps uses SSH and Telnet to communicate with your device. Follow the instructions in the product documentation for your device to enable SSH and Telnet.
These commands are used for discovery and performance monitoring via SSH. Please make sure that the access credentials you provide in AccelOps have the permissions necessary to execute these commands on the device.
- show startup-config
- show running-config
- show version
- show flash
- show ip route
- show mac-address-table or show mac address-table
- show vlan brief
- show process cpu
- show process mem
- show disk0
- enable
- terminal pager 0
SNMP
SNMP V1/V2c
- Log in to the Cisco IOS console or telnet to the device.
- Enter configuration mode.
SNMP V3
- Log in to the Cisco IOS console or telnet to the device.
- Enter configuration mode.
- Exit configuration mode.
Syslog
- Login to the Cisco IOS console or telnet to the device.
- Enter configuration mode.
Sample Cisco IOS Syslog Messages
NetFlow
Enable NetFlow on the Router
- Enter configuration mode.
- For every interface, run this command.
Set Up NetFlow Export
- Enter configuration mode.
- Run these commands.
On MLS switches, such as the 6500 or 7200 models, also run these commands.
You can verify that you have set up NetFlow correctly by running these commands.
Sample Flexible Netflow Configuration in IOS
IP SLA
IP SLA is a technology where a pair of routers can run synthetic tests between themselves and report detailed traffic statistics. This enables network administrators to get performance reports between sites without depending on end-host instrumentation.
Cisco provides detailed documents for configuring IP SLA for both general traffic and VoIP.
A variety of IP SLA tests can be run, for example UDP/ICMP Jitter, UDP Jitter for VoIP, UDP/ICMP Echo, TCP Connect, HTTP, etc. You can see the traffic statistics for these these tests by routing appropriate Show commands on the router. However, only these IP SLA tests are exported via
RTT-MON SNMP MIB.
UDP Jitter (reported by AccelOps event type PH_DEV_MON_IPSLA_MET)
UDP Jitter for VoIP (reported by AccelOps event type PH_DEV_MON_IPSLA_VOIP_MET)
HTTP performance (reported by AccelOps event type PH_DEV_MON_IPSLA_HTTP_MET)
ICMP Echo (reported by AccelOps event type PH_DEV_MON_IPSLA_ICMP_MET) UDP Echo (reported by AccelOps event type PH_DEV_MON_IPSLA_UDP_MET)
These are the only IP SLA tests monitored by AccelOps.
Configuring IP SLA involves choosing and configuring a router to initiate the test and a router to respond. The test statistics are automatically reported by the initiating router via SNMP, so no additional configuration is required. Bi-directional traffic statistics are also reported by the initiating router, so you don’t need to set up a reverse test between the original initiating and responding routers. AccelOps automatically detects the presence of the IP SLA SNMP MIB (CISCO-RTTMON-MIB) and starts collecting the statistics. Configuring IP SLA Initiator for UDP Jitter
Class-Based QoS
CBQoS enables routers to enforce traffic dependent Quality of Service policies on router interfaces for to make sure that important traffic such as VoIP and mission critical applications get their allocated network resources.
Cisco provides detailed documents for configuring IP SLA for both general traffic and VoIP,
The CbQoS statistics are automatically reported by the router via SNMP, so no additional configuration is needs. AccelOps detects the presence of valid CBQoS MIBs and starts monitoring them.
NBAR
Cisco provides protocol discovery via NBAR configuration guide.
Make sure that the CISCO-NBAR-PROTOCOL-DISCOVERY-MIB is enabled.
Sample event generated by AccelOps
[PH_DEV_MON_CISCO_NBAR_STAT]:[eventSeverity]=PHL_INFO,[fileName]=deviceC isco.cpp,[lineNumber]=1644,[hostName]=R1.r1.accelops.com,[hostIpAddr]=10 .1.20.59,[intfName]=Ethernet0/0,[appTransportProto]=snmp,[totFlows]=4752
,[recvFlows]=3168,[sentFlows]=1584,[totBytes64]=510127,[recvBytes64]=277
614,[sentBytes64]=232513,[totBitsPerSec]=22528.000000,[recvBitsPerSec]=1
2288.000000,[sentBitsPerSec]=10240.000000,[phLogDetail]=
Settings for Access Credentials
How CPU and Memory Utilization is Collected for Cisco IOS
AccelOps follows the process for collecting information about CPU utlization that is recommended by Cisco.
Monitoring CPU
Monitoring Memory using PROCESS-MIB
Monitoring CPU
The OID is 1.3.6.1.4.1.9.9.109.1.1.1.1.8. The issue there are multiple CPUs – which ones to take? A sample SNMP walk for this OID looks like this
Note that there are 4 CPUs – indexed 1-4. We need to identify Control plane CPU and Data plane CPU
The cpu Id -> entity Id mapping from the following SNMP walk
Combining all this information, we finally obtain the CPU information for each object
The relevant OIDs are
Used memory OID = 1.3.6.1.4.1.9.9.48.1.1.1.6
Free memory OID = 1.3.6.1.4.1.9.9.48.1.1.1.5
Memory Util = (Used memory) / (Used memory + Free memory)
Therefore
Cisco Meraki Cloud Controller and Network Devices Configuration
What is Discovered and Monitored
Availability (from SNMP Trap)
Performance (Fixed threshold)
Performance (Dynamic threshold based on baselines)
Settings for Access Credentials
What is Discovered and Monitored
Cisco Meraki Devices are discoverable in either of the following ways
SNMP to the Cloud Controller
SNMP to each Network Device
SNMP Traps can be sent from the Cloud Controller. Cisco Meraki Network Devices can also send logs directly to AccelOps.
| Protocol | Information Discovered | Metrics collected | Used for | |
| SNMP (V1, V2c) to
Cloud Controller or Devices |
Host name, Software version, Hardware model, Network interfaces | Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability and
Performance Monitoring |
|
| Syslog from Meraki
Firewalls |
Firewall logs | Security Monitoring | ||
| SNMP Traps from
Cloud Controller |
Health | Availability
Monitoring |
Event Types
Interface Utilization: PH_DEV_MON_NET_INTF_UTIL
Rules
Availability (from SNMP Trap)
Meraki Device Cellular Connection Disconnected
Meraki Device Down
Meraki Device IP Conflict
Meraki Device Interface Down
Meraki Device Port Cable Error
Meraki Device VPN Connectivity Down
Meraki Foreign AP Detected
Meraki New DHCP Server
Meraki New Splash User
Meraki No DHCP lease
Meraki Rogue DHCP Server
Meraki Unreachable Device
Meraki Unreachable RADIUS Server
Meraki VPN Failover
Performance (Fixed threshold)
Network Intf Error Warning
Network Intf Error Critical
Network Intf Util Warning
Network Intf Util Critical
Performance (Dynamic threshold based on baselines)
Sudden Increase in Network Interface Traffic
Sudden Increase in Network Interface Errors
Reports
None
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Settings for Access Credentials
Cisco NX-OS Router and Switch Configuration
What is Discovered and Monitored
Enable NetFlow on the Router
Create a Flow Template and Define the Fields to Export
Set up Netflow Exporter
Associate the Record to the Exporter Using a Flow Monitor
Apply the Flow Monitor to Every Interface Settings for Access Credentials
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP (V1,
V2c, V3) |
Host name, IOS version, Hardware model, Memory size, Network interface details name, address, mask and description | Uptime, CPU and Memory utilization, Free processor and I/O memory, Free contiguous processor and I/O memory, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability
and Performance Monitoring |
| SNMP (V1,
V2c, V3) |
Hardware component details: serial number, model, manufacturer, software and firmware versions of hardware components such as chassis, CPU, fan, power supply, network cards etc. | Hardware health: temperature, fan and power supply | Availability |
| SNMP (V1,
V2c, V3) |
Trunk port connectivity between switches and
VLANs carried over a trunk port (via CDP MIB), ARP table |
Topology and end-host location | |
| SNMP (V1,
V2c, V3) |
BGP connectivity, neighbors, state, AS number | BGP state change | Routing
Topology, Availability Monitoring |
| SNMP (V1,
V2c, V3) |
OSPF connectivity, neighbors, state, OSPF
Area |
OSPF state change | Routing
Topology, Availability Monitoring |
| SNMP (V1,
V2c, V3) |
Class based QoS metrics: For (router interface, policy, class map) tuple: class map metrics including Pre-policy rate, post-police rate, drop rate and drop pct; po lice action metrics including conform rate, exceeded rate and violated rate; queu e metrics including current queue length, max queue length and discarded packets | QoS
performance monitoring |
|
| Telnet/SSH | Running and startup configuration, Image file
name, Flash memory size, Running processes |
Startup configuration change, delta between running and startup configuration,
Running process CPU and memory utilization |
Performance
Monitoring, Security and Compliance |
| Telnet/SSH | End host Layer 2 port mapping: switch interface to VLAN id, end host IP/MAC address association | ||
| Syslog | Device type | System logs and traffic logs matching acl statements | Availability,
Security and Compliance |
Event Types
In CMDB > Event Types, search for “nx-os” in the Device Type column to see the event types associated with this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Telnet/SSH
AccelOps uses Telnet/SSH to communicate with this device. Refer to the product documentation for your device to enable Telnet/SSH.
These commands are used for discovery and performance monitoring via SSH. Please make sure that the access credentials you provide in AccelOps have the permissions necessary to execute these commands on the device.
- show startup-config
- show running-config
- show version
- show flash
- show context
- show ip route
- show cam dynamic
- show mac-address-table
- show mac address-table (for Nexus 1000v)
- show vlan brief
- show process cpu
- show process mem
- show disk0
- enable
- terminal length 0
Syslog
AccelOps processes events from this device via syslogs sent by the device. Configure the device to send syslogs to AccelOps as directed in the device’s product documentation, and AccelOps will parse the contents.
For Syslog Server, or the server where the syslogs should be sent, enter the IP address of your AccelOps virtual appliance.
For Port, enter 514.
Make sure that the syslog type is Common Event Format (CEF). The syslog format should be the same as that shown in the example.
NetFlow
Enable NetFlow on the Router
- Enter configuration mode.
- Run this command.
Create a Flow Template and Define the Fields to Export You can can also try using the pre-defined NetFlow template.
Set up Netflow Exporter Run these commands.
Associate the Record to the Exporter Using a Flow Monitor In this example the flow monitor is called AccelOpsMonitoring.
Run these commands.
Apply the Flow Monitor to Every Interface Run these commands.
You can now check the configuration using the show commands.
Settings for Access Credentials
Cisco ONS Configuration
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP
(V1, V2c) |
Host name, Serial Number, software version,
Hardware model, Network interfaces, Hardware Components |
Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability and
Performance Monitoring |
| SNMP
Trap |
Alerts | Availability and
Performance Monitoring |
Event Types
Over 1800 event types defined – search for “Cisco-ONS” in CMDB > Event Types
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Settings for Access Credentials
Dell Force10 Router and Switch Configuration
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP (V1,
V2c) |
Host name, Serial number, Software version,
Hardware model, Network interfaces, Hardware Components |
Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), CPU utilization, Hardware Status | Availability and
Performance Monitoring |
| Telnet/SSH | Running and Startup configurations | Startup Configuration Change, Difference between Running and Startup configurations | Change
monitoring |
Event Types
In CMDB > Event Types, search for “force10” in the Description column to see the event types associated with this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
TelNet/SSH
AccelOps uses Telnet/SSH to communicate with this device. Refer to the product documentation for your device to enable Telnet/SSH.
These commands are used for discovery and performance monitoring via SSH. Please make sure that the access credentials you provide in AccelOps have the permissions necessary to execute these commands on the device. To initiate discovery and monitoring of your device over this protocol, follow the instructions in Setting Access Credentials for Device Discovery.
- show startup-config
- show running-config
- show version
- show ip route
- enable
- terminal pager 0
Settings for Access Credentials
Dell NSeries Switch Configuration
Configuration
SNMP
Settings for Access Credentials
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for | |
| SNMP
(V1, V2c) |
Host name, software version, Hardware model, Network
interfaces, |
Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability and
Performance Monitoring |
|
| SNMP
(V1, V2c) |
Hardware Status (Power Supply, Fan) | Availability
Monitoring |
||
| SSH | Configuration | Change management |
Event Types
CPU Monitoring: PH_DEV_MON_SYS_CPU_UTIL
Memory Monitoring: PH_DEV_MON_SYS_MEM_UTIL
Interface Utilization: PH_DEV_MON_NET_INTF_UTIL
Hardware Status: PH_DEV_MON_HW_STATUS
Configuration Change: PH_DEV_MON_CHANGE_STARTUP_CONFIG
Rules
Availability
Network Device Degraded – Lossy Ping Response
Network Device Down – no ping response
Network Device Interface Flapping
Critical Network Device Interface Staying Down
Non-critical Network Device Interface Staying Down
Network Device Hardware Warning
Network Device Hardware Critical
Performance (Fixed threshold)
Network CPU Warning
Network CPU Critical
Network Memory Warning
Network Memory Critical
Network Intf Error Warning
Network Intf Error Critical
Network Intf Util Warning
Network Intf Util Critical
Performance (Dynamic threshold based on baselines)
Sudden Increase In System CPU Usage
Sudden Increase in System Memory Usage
Sudden Increase in Network Interface Traffic
Sudden Increase in Network Interface Errors
Change
Startup Config Change
Reports
Availability
Availability: Router/Switch Ping Monitor Statistics
Performance
Performance: Top Routers Ranked By CPU Utilization
Performance: Top Routers By Memory Utilization
Performance: Top Router Network Intf By Util, Error, Discards
Top Routers/Switches by Business Hours Network Ping Uptime Pct (Achieved Network Ping SLA)
Top Routers/Switches by Business Hours System Uptime Pct (Achieved System SLA)
Top Routers/Switches by Network Ping Uptime Pct (Achieved Network Ping SLA)
Top Routers/Switches by System Uptime Pct (Achieved System SLA)
Top Router Interfaces by Days-since-last-use
Change
Change: Router Config Changes Detected Via Login
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Settings for Access Credentials
Dell PowerConnect Switch and Router Configuration
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP (V1,
V2c) |
Host name, Serial number, Software version,
Hardware model, Network interfaces, Hardware Components |
Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), CPU utilization, Hardware Status | Availability and
Performance Monitoring |
| Telnet/SSH | Running and Startup configurations | Startup Configuration Change, Difference between Running and Startup configurations | Change
monitoring |
Event Types
There are no event types defined specifically for this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Telnet/SSH
AccelOps uses Telnet/SSH to communicate with this device. Refer to the product documentation for your device to enable Telnet/SSH.
These commands are used for discovery and performance monitoring via SSH. Please make sure that the access credentials you provide in AccelOps have the permissions necessary to execute these commands on the device. To initiate discovery and monitoring of your device over this protocol, follow the instructions in Setting Access Credentials for Device Discovery.
- show startup-config
- show running-config
- show version
- show ip route
- enable
- terminal pager 0
Settings for Access Credentials
Foundry Networks IronWare Router and Switch Configuration
What is Discovered and Monitored
Event Types
Rules
Reports
Configuration
SNMP
Telnet/SSH
Syslog
Sample Parsed PowerConnect Syslog Message Settings for Access Credentials
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for | ||
| SNMP (V1,
V2c) |
Host name, Ironware version, Hardware model, Network interfaces, | Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability and
Performance Monitoring |
||
| Telnet/SSH | Running and startup configuration | Startup configuration change, delta between running and startup configuration | Performance Monitoring,
Security and Compliance |
||
| SNMP (V1,
V2c) |
Trunk port connectivity between switches and VLANs carried over a trunk port, End host Layer 2 port mapping: switch interface to VLAN id, end host IP/MAC address association | Topology and end-host location | |||
| Syslog | Device type | System logs and traffic logs matching acl statements | Availability,
Security and Compliance |
||
Event Types
In CMDB > Event Types, search for “foundry_ironware” in the Description column to see the event types associated with this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
- Log in to the device manager for your switch or router with administrative privileges.
- Enter configuration mode.
- Run these commands to set the community string and enable the SNMP service.
- Exit config mode.
- Save the configuration.
Telnet/SSH
AccelOps uses Telnet/SSH to communicate with this device. Refer to the product documentation for your device to enable Telnet/SSH. Syslog
- Log in to the device manager for your switch or router with administrative privileges.
- Enter configuration mode.
- Run this command to set your AccelOps virtual appliance as the recipient of syslogs from your router or switch.
- Exit config mode.
- Save the configuration.
Sample Parsed PowerConnect Syslog Message
Settings for Access Credentials
HP/3Com ComWare Switch Configuration
What is Discovered and Monitored
Event Types
Rules
Reports
Configuration
SNMP
Syslog
Example Syslog for ComWare Switch Messages Settings for Access Credentials
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for | |
| SNMP
(V1, V2c) |
Host name, software version, Hardware model, Network interfaces, | Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), Hardware status:
Power Supply, Fan, Temperature |
Availability and
Performance Monitoring |
|
| SNMP (V1, V2c,
V3) |
Hardware status: Temperature | Availability | ||
| Syslog | System logs | Availability,
Security and Compliance |
Event Types
In CMDB > Event Types, search for “compare” in the Device Type column to see the event types associated with this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Syslog
AccelOps processes events from this device via syslogs sent by the device. Configure the device to send syslogs to AccelOps as directed in the device’s product documentation, and AccelOps will parse the contents.
For Syslog Server, or the server where the syslogs should be sent, enter the IP address of your AccelOps virtual appliance.
For Port, enter 514.
Make sure that the syslog type is Common Event Format (CEF). The syslog format should be the same as that shown in the example.
Example Syslog for ComWare Switch Messages
%Apr 2 11:38:11:113 2010 H3C DEVD/3/BOARD REBOOT:Chasis 0 slot 2 need be rebooted automatically! %Sep 22 20:38:32:947 2009 H3C DEVD/4/BRD MISPLUG: The board or subcard in slot 1 is not supported. %Sep 22 20:38:32:947 2009 H3C DEVD/4/BRD MISPLUG: The board type of MR in 1 is different from the Mate MR’s, so the MR can’t work properly. %Sep 22 20:38:32:947 2009 H3C DEVD/2/BRD TOO HOT:Temperature of the board is too high! %Sep 22 20:38:32:947 2009 H3C DEVD/2/ FAN CHANGE: Chassis 1: Fan communication state changed: Fan 1 changed to fault.
Settings for Access Credentials
HP ProCurve Switch Configuration
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for | ||
| SNMP (V1,
V2c) |
Host name, version, Hardware model, Network interfaces, | Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), Hardware status: Power Supply, Fan, Temperature | Availability
and Performance Monitoring |
||
| Telnet/SSH | Running and startup configuration | Startup configuration change, delta between running and startup configuration | Performance
Monitoring, Security and Compliance |
||
| SNMP (V1,
V2c) |
Trunk port connectivity between switches and VLANs carried over a trunk port, End host Layer 2 port mapping: switch interface to VLAN id, end host
IP/MAC address association |
Topology and end-host location | |||
Event Types
In CMDB > Event Types, search for “procurve” in the Device Type and Description columns to see the event types associated with this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
- Go to Configuration > SNMP Community > V1/V2 Community.
- Enter a Community Name.
- For MIB-View, select Operator.
- For Write-Access, leave the selection cleared.
- Click Add.
SSH/Telnet
- Log into the device manager for your ProCurve switch.
- Go to Security > Device Passwords.
- Create a user and password for Read-Write Access.
Although AccelOps does not modify any configurations for your switch, Read-Write Access is needed to read the device configuration.
- Go to Security > Authorized Addresses and add the AccelOps IP to Telnet/SSH. This is an optional step.
Settings for Access Credentials
HP Value Series (19xx) and HP 3Com (29xx) Switch Configuration
Configuration
SNMP
Settings for Access Credentials
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for | |
| SNMP
(V1, V2c) |
Host name, software version, Hardware model, Network
interfaces, |
Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability and
Performance Monitoring |
|
| SSH | Configuration | Change management |
Event Types
CPU Monitoring: PH_DEV_MON_SYS_CPU_UTIL
Memory Monitoring: PH_DEV_MON_SYS_MEM_UTIL
Interface Utilization: PH_DEV_MON_NET_INTF_UTIL
Configuration Change: PH_DEV_MON_CHANGE_STARTUP_CONFIG
Rules
Availability
Network Device Degraded – Lossy Ping Response
Network Device Down – no ping response
Network Device Interface Flapping
Critical Network Device Interface Staying Down
Non-critical Network Device Interface Staying Down
Performance (Fixed threshold)
Network CPU Warning
Network CPU Critical
Network Memory Warning
Network Memory Critical
Network Intf Error Warning
Network Intf Error Critical
Network Intf Util Warning
Network Intf Util Critical
Performance (Dynamic threshold based on baselines)
Sudden Increase In System CPU Usage
Sudden Increase in System Memory Usage
Sudden Increase in Network Interface Traffic
Sudden Increase in Network Interface Errors
Change
Startup Config Change
Reports
Availability
Availability: Router/Switch Ping Monitor Statistics
Performance
Performance: Top Routers Ranked By CPU Utilization
Performance: Top Routers By Memory Utilization
Performance: Top Router Network Intf By Util, Error, Discards
Top Routers/Switches by Business Hours Network Ping Uptime Pct (Achieved Network Ping SLA)
Top Routers/Switches by Business Hours System Uptime Pct (Achieved System SLA)
Top Routers/Switches by Network Ping Uptime Pct (Achieved Network Ping SLA)
Top Routers/Switches by System Uptime Pct (Achieved System SLA)
Top Router Interfaces by Days-since-last-use
Change
Change: Router Config Changes Detected Via Login
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Settings for Access Credentials
Juniper Networks JunOS Switch Configuration
What is Discovered and Monitored
Event Types
Rules
Reports
Configuration
SNMP
Syslog
Sample JunOS Syslog Messages sFlow
Settings for Access Credentials
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP (V1,
V2c) |
Host name, JunOS version, Hardware model, Network interfaces, | Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths), Hardware status: Power Supply, Fan, Temperature | Availability and
Performance Monitoring |
| Telnet/SSH | Running and startup configuration | Startup configuration change, delta between running and startup configuration | Performance
Monitoring, Security and Compliance |
| SNMP (V1,
V2c, V3) |
Trunk port connectivity between switches and VLANs carried over a trunk port, End host Layer 2 port mapping: switch interface to VLAN id, end host IP/MAC address association | Topology and end-host location | |
| Syslog | System logs and traffic logs matching acl statements | Availability,
Security and Compliance |
|
| sflow | Traffic flow | Availability,
Security and Compliance |
Event Types
In CMDB > Event Types, search for “junos” in the Device Type column to see the event types associated with this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
- Log in to the device manager for your JunOS switch with administrator privileges.
- Go to Configure > Services > SNMP.
- Under Communities, click Add.
- Enter a Community Name.
- Set Authorization to read-only.
- Click OK.
Syslog
- Log in to the device manager for your JunOS switch with administrator privileges.
- Go to Dashboard > CLI Tools > CLI Editor.
- Edit the syslog section to send syslogs to AccelOps.
- Click Commit. Sample JunOS Syslog Messages
sFlow
Routing the sFlow Datagram in EX Series Switches
According to Juniper documentation, the sFlow datagram cannot be routed over the management Ethernet interface (me0) or virtual management interface (vme0) in an EX Series switch implementation. It can only be exported over the network Gigabit Ethernet or 10-Gigabit Ethernet ports using valid route information in the routing table.
- Log in to the device manager for your JunOS switch with administrator privileges.
- Go to Configure > CLI Tools > Point and Click CLI.
- Expand Protocols and select slow.
- Next to Collector, click Add new entry.
- Enter the IP address for your AccelOps virtual appliance.
- For UDP Port, enter 6343.
- Click Commit.
- Next to Interfaces, click Add new entry.
- Enter the Interface Name for all interfaces that will send traffic over sFlow.
- Click Commit.
- To disable the management port, go to Configure > Management Access, and remove the address of the management port. You can also disconnect the cable.
Settings for Access Credentials
Mikrotek Router Configuration
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for |
| SNMP
(V1, V2c) |
Host name, software version,
Hardware model, Network interfaces |
Uptime, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability and
Performance Monitoring |
Event Types
There are no event types defined specifically for this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Settings for Access Credentials
Nortel ERS and Passport Switch Configuration
What is Discovered and Monitored
| Protocol | Information Discovered | Metrics collected | Used for | |
| SNMP
(V1, V2c) |
Host name, software version, Hardware model, Network
interfaces, |
Uptime, CPU and Memory utilization, Network Interface metrics (utilization, bytes sent and received, packets sent and received, errors, discards and queue lengths) | Availability and
Performance Monitoring |
|
| SNMP
(V1, V2c) |
Hardware status: Temperature | |||
| SNMP (V1, V2c,
V3) |
Layer 2 port mapping: associating switch ports to directly connected host IP/MAC addresses | Identity and location table; Topology |
Event Types
There are no event types defined specifically for this device.
Rules
There are no predefined rules for this device.
Reports
There are no predefined reports for this device.
Configuration
SNMP
AccelOps uses SNMP to discover and monitor this device. Make sure SNMP is enabled for the device as directed in its product documentation, then follow the instructions in Setting Access Credentials for Device Discovery to establish the connection between the device and AccelOps, and to initiate the device discovery process.
Settings for Access Credentials
Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!