Advanced logging

This section explains how to configure other log features within your existing log configuration. You may want to include other log features after initially configuring the log topology because the network has either outgrown the initial configuration, or you want to add additional features that will help your network’s logging requirements.

The following topics are included in this section:

l Log backup and restore tools l Configuring logging to multiple Syslog servers l Using Automatic Discovery to connect to a FortiAnalyzer unit l Activating a FortiCloud account for logging purposes l Viewing log storage space l Customizing and filtering log messages l Viewing logs from the CLI l Configuring NAC Quarantine logging l Logging local-in policies l Tracking specific search phrases in reports l Interpreting and configuring FSSO syslog log messages

Log backup and restore tools

Local disk logs can now be backed up and restored to local files, using CLI commands:

execute log backup <filename> execute log restore <filename>

Restoring logs will wipe the current log and report content off the disk.

Logs can also now be exported to a USB storage device, as LZ4 compressed files, from both CLI and GUI. When you insert a USB drive into the FortiGate’s USB port, the USB menu will appear in the GUI. The menu shows the amount of storage on the USB disk, and the log file size, and you can select Copy to USB to copy the log data to the drive.

Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Logging and reporting for large networks

This section explains how to configure the FortiGate unit for logging and reporting in a larger network, such as an enterprise network. To set up this type of network, you are modifying the default log settings, and you are also modifying the default report.

The following procedures are examples and can be used to help you when configuring your own network’s log topology.

Since some of these settings must be modified or enabled or disabled in the CLI, it is recommended to review the FortiGate CLI Reference for any additional information about the commands used herein, as well as any that you would need to use in your own newtork’s log topology.

Modifying default log device settings

The default log device settings must be modified so that system performance is not compromised. The FortiGate unit, by default, has all logging of FortiGate features enabled and well as logging to either the FortiGate unit’s system memory or hard disk, depending on the model.

Modifying multiple FortiGate units’ system memory default settings

When the FortiGate unit’s default log device is its system memory, you can modify it to fit your log network topology. In this topic, the following is an example of how you can modify these default settings.

To modify the default system memory settings

1. Log in to the CLI.
2. Enter the following command syntax to modify the logging settings:

config log memory setting set status enable

end

3. Enter the following command syntax to modify the FortiGate features that are enabled for logging:

config log memory filter set forward-traffic enable set local-traffic enable set sniffer-traffic enable set anomaly enable set voip enable set multicast-traffic enable

set dns enable

end

4. Repeat steps 2 and 3 for the other FortiGate units.
5. Test the modified settings using the procedure below.

Modifying multiple FortiGate units’ hard disk default log settings

You will have to modify each FortiGate unit’s hard disk default log settings. The following is an example of how to modify these default settings.

To modify the default hard disk settings

1. Log in to the CLI.
2. Enter the following command syntax to modify the logging settings:

config log disk setting set ips-archive disable set status enable set max-log-file-size 1000 set storage Internal set log-quota 100 set report-quota 100

end

3. In the CLI, enter the following to disable certain event log messages that you do not want logged:

config log eventfilter set event enable set system enable set vpn enable set user enable set router disable set wan-opt disable

end

4. Repeat the steps 2 to 4 for the other FortiGate units.
5. Test the modified settings using the procedure below.

Testing the modified log settings

After modifying both the settings and the FortiGate features for logging, you can test that the modified settings are working properly. This test is done in the CLI.

To test sending logs to the log device

1. In the CLI, enter the following command syntax:

diag log test

When you enter the command, the following appears:

generating a system event message with level – warning generating an infected virus message with level – warning generating a blocked virus message with level – warning generating a URL block message with level – warning generating a DLP message with level – warning generating an IPS log message generating an anomaly log message generating an application control IM message with level – information generating an IPv6 application control IM message with level – information generating deep application control logs with level – information generating an antispam message with level – notification generating an allowed traffic message with level – notice generating a multicast traffic message with level – notice generating a ipv6 traffic message with level – notice generating a wanopt traffic log message with level – notification generating a HA event message with level – warning generating netscan log messages with level – notice generating a VOIP event message with level – information generating a DNS event message with level – information generating authentication event messages generating a Forticlient message with level – information generating a URL block message with level – warning

2. In the web-based interface, go to Log & Report > System Events, and view the logs to see some of the recently generated test log messages.

You will be able to tell the test log messages from real log messages because they do not have “real” information; for example, the test log messages for the vulnerability scan contain the destination IP address of 1.1.1.1 or 2.2.2.2.

Configuring the backup solution

Even though you are logging to multiple FortiAnalyzer units, this is more of a redundancy solution rather than a complete backup solution in this example.

The multiple FortiAnalyzer units act similar to a HA cluster, since if one FortiAnalyzer unit fails, the others continue storing the logs they receive. In a backup solution, the logs are backed up to another secure location if something happens to the log device.

A good alternate or redundant option is the FortiCloud service, which can provide secure online logging and management for multiple devices.

Configuring logging to multiple FortiAnalyzer units

The following example shows how to configure logging to multiple FortiAnalyzer units. Configuring multiple FortiAnalyzer units is quick and easy; however, you can only configure up to three FortiAnalyzer units per FortiGate unit.

To configure multiple FortiAnalyzer units

1. In the CLI, enter the following command syntax to configure the first FortiAnalyzer unit: config log fortianalyzer setting set status enable set server 172.20.120.22 set max-buffer-size 1000 set buffer-max-send 2000 set address-mode static set conn-timeout 100 set monitor-keepalive-period 120 set monitor-failure-retry-period 2000

end

2. Disable the features that you do not want logged, using the following example command syntax. You can view the CLI Reference to see what commands are available.

config log fortianalyzer filter set forward-traffic (enable | disable) … end

3. Enter the following commands for the second FortiAnalyzer unit: config log fortianalyzer2 setting set status enable set server 172.20.120.23 set max-buffer-size 1000 set buffer-max-send 2000 set address-mode static set conn-timeout 100 set monitor-keepalive-period 120 set monitor-failure-retry-period 2000

end

4. Disable the features that you do not want logged, using the following example command syntax.

config log fortianalyzer2 filter set event (enable | disable) … end

5. Enter the following commands for the last FortiAnalyzer unit: config log fortianalyzer3 setting set status enable set server 172.20.120.23 set max-buffer-size 1000 set buffer-max-send 2000 set address-mode static set conn-timeout 100 set monitor-keepalive-period 120 set monitor-failure-retry-period 2000

end

6. Disable the features that you do not want logged, using the following example command syntax.

config log fortianalyzer3 filter set voip (enable | disable) … end

7. Test the configuration by using the procedure, “Testing the modified log settings”.
8. On the other FortiGate units, configure steps 1 through 6, ensuring that logs are being sent to the FortiAnalyzer units.

Configuring logging to the FortiCloud server

The FortiCloud server can be used as a redundant backup, or your primary logging solution. The following assumes that this service has already been registered, and a subscription has been purchased for expanded space. The following is an example of how to these settings are configured for a network’s log configuration. You need to have access to both the CLI and the web-based manager when configuring uploading of logs. The upload time and interval settings can be configured in the web-based interface.

To configure logging to the FortiCloud server

1. Go to Dashboard and click Login next to FortiCloud in the License Information widget.
2. Enter your username and password, and click OK. (Or register, if you have not yet done so.)
3. Logs will automatically be uploaded to FortiCloud as long as your FortiGate is linked to your FortiCloud account.
4. To configure the upload time and interval, go to Log & Report > Log Settings.
5. Under the Remote Logging and Archiving header, you can select your desired upload time.
6. With FortiCloud you can easily store and access FortiGate logs that can give you valuable insight into the health and security of your network.

 

Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Logging and reporting for small networks

This section explains how to configure the FortiGate unit for logging and reporting in a small office or SOHO/SMB network. To properly configure this type of network, you will be modifying the default log settings, as well as the default FortiOS report.

The following procedures are examples and can be used to help you when configuring your own network’s log topology. Since some of these settings must be modified or enabled or disabled in the CLI, it is recommended to review the FortiGate CLI Reference for any additional information about the commands used herein, as well as any that you would need to use in your own network’s log topology.

Modifying default log device settings

The default log device settings must be modified so that system performance is not compromised. The FortiGate unit, by default, has all logging of FortiGate features enabled, except for traffic logging. The default logging location will be either the FortiGate unit’s system memory or hard disk, depending on the model. Units with a flash disk are not recommended for disk logging.

Modifying the FortiGate unit’s system memory default settings

When the FortiGate unit’s default log device is its system memory, the following is modified for a small network topology. The following is an example of how to modify these default settings.

To modify the default system memory settings

1. Log in to the CLI.
2. Enter the following command syntax to modify the logging settings:

config log memory setting set status enable

end

3. The following example command syntax modifies which FortiGate features that are enabled for logging:

config log memory filter set forward-traffic enable set local-traffic enable set sniffer-traffic enable set anomaly enable set voip disable set multicast-traffic enable

set dns enable

end

Modifying the FortiGate unit’s hard disk default settings

When the FortiGate unit’s default log device is its hard disk, you need to modify those settings to your network’s logging needs so that you can effectively log what you want logged. The following is an example of how to modify these default settings.

To modify the default hard disk settings

1. Log in to the CLI.
2. Enter the following command syntax to modify the logging settings:

config log disk setting set ips-archive disable set status enable set max-log-file-size 1000 set storage FLASH set log-quota 100 set report-quota 100

end

3. In the CLI, enter the following to disable certain event log messages that you do not want logged:

config log eventfilter set event enable set system enable set vpn disable set user enable set router disable set wan-opt disable

end

Testing sending logs to the log device

After modifying both the settings and the FortiGate features for logging, you can test that the modified settings are working properly. This test is done in the CLI.

To test sending logs to the log device

1. In the CLI, enter the following command syntax:

diag log test

When you enter the command, the following appears:

generating a system event message with level – warning generating an infected virus message with level – warning generating a blocked virus message with level – warning generating a URL block message with level – warning generating a DLP message with level – warning generating an IPS log message generating an anomaly log message generating an application control IM message with level – information generating an IPv6 application control IM message with level – information generating deep application control logs with level – information generating an antispam message with level – notification generating an allowed traffic message with level – notice generating a multicast traffic message with level – notice generating a ipv6 traffic message with level – notice generating a wanopt traffic log message with level – notification generating a HA event message with level – warning generating netscan log messages with level – notice generating a VOIP event message with level – information generating a DNS event message with level – information generating authentication event messages generating a Forticlient message with level – information generating a URL block message with level – warning

2. In the web-based interface, go to Log & Report > System Events, and view the logs to see some of the recently generated test log messages.

You will be able to tell the test log messages from real log messages because they do not have “real” information; for example, the test log messages for the vulnerability scan contain the destination IP address of 1.1.1.1 or 2.2.2.2.

Configuring the backup solution

A backup solution provides a way to ensure logs are not lost. The following backup solution explains logging to a FortiCloud server and uploading logs to a FortiAnalyzer unit. With this backup solution, there can be three simultaneous storage locations for logs, the first being the FortiGate unit itself, the FortiAnalyzer unit and then the FortiCloud server.

Configuring logging to a FortiCloud server

The FortiCloud server can be used as a redundant backup, or your primary logging solution. The following assumes that this service has already been registered, and a subscription has been purchased for expanded space. The following is an example of how to these settings are configured for a network’s log configuration. You need to have access to both the CLI and the web-based manager when configuring uploading of logs. The upload time and interval settings can be configured in the web-based interface.

To configure logging to the FortiCloud server

1. Go to Dashboard and click Login next to FortiCloud in the License Information widget. 2. Enter your username and password, and click OK. (Or register, if you have not yet done so.)
2. Logs will automatically be uploaded to FortiCloud as long as your FortiGate is linked to your FortiCloud account.
3. To configure the upload time and interval, go to Log & Report > Log Settings.
4. Under the Logging and Archiving header, you can select your desired upload time.

With FortiCloud you can easily store and access FortiGate logs that can give you valuable insight into the health and security of your network.

Configuring uploading logs to the FortiAnalyzer unit

The logs will be uploaded to the FortiAnalyzer unit at a scheduled time. The following is an example of how to upload logs to a FortiAnalyzer unit.

To upload logs to a FortiAnalyzer unit

1. Go to Log & Report > Log Settings.
2. In the Remote Logging and Archiving section, select the check box beside Send Logs to FortiAnalyzer/FortiManager.
3. Select FortiAnalyzer (Daily at 00:00).
4. Enter the FortiAnalyzer unit’s IP address in the IP Address
5. To configure the daily upload time, open the CLI.
6. Enter the following to configure when the upload occurs, and the time when the unit uploads the logs:

config log fortianalyzer setting set upload-interval {daily | weekly | monthly} set upload-time <hh:mm>

end

7. To change the upload time, in the web-based manager, select Change beside the upload time period, and then make the changes in the Upload Schedule window. Select OK.

Testing uploading logs to a FortiAnalyzer unit

You should test that the FortiGate unit can upload logs to the FortiAnalyzer unit, so that the settings are configured properly.

To test the FortiAnalyzer upload settings

1. Go to Log & Report > Log Settings.
2. In the Logging and Archiving section, under Send Logs to FortiAnalyzer/FortiManager, change the time to the current time by selecting Change.

For example, the current time is 11:10 am, so Change now has the time 11:10.

3. Select OK.

The logs will be immediately sent to the FortiAnalyzer unit, and will be available to view from within the FortiAnalyzer’s interface.

Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Best practices: Log management

When the FortiGate unit records FortiGate activity, valuable information is collected that provides insight into how to better protect network traffic against attacks, including misuse and abuse. There is a lot to consider before enabling logging on a FortiGate unit, such as what FortiGate activities to enable and which log device is best suited for your network’s logging needs. A plan can help you in deciding the FortiGate activities to log, a log device, as well as a backup solution in the event the log device fails. This plan should provide you with an outline, similar to the following:

l what FortiGate activities you want and/or need logged (for example, security features) l the logging device best suited for your network structure l if you want or require archiving of log files l ensuring logs are not lost in the event a failure occurs.

After the plan is implemented, you need to manage the logs and be prepared to expand on your log setup when the current logging requirements are outgrown. Good log management practices help you with these tasks.

Log management practices help you to improve and manage logging requirements. Logging is an ever-expanding tool that can seem to be a daunting task to manage. The following management practices will help you when issues arise, or your logging setup needs to be expanded.

1. Revisit your plan on a yearly basis to verify that your logging needs are being met by your current log setup. For example, your company or organization may require archival logging, but not at the beginning of your network’s lifespan. Archival logs are stored on a FortiGate unit’s local hard drive, a FortiAnalyzer unit, or a FortiCloud server, in increasing order of size.
2. Configure an alert message that will notify you of activities that are important to be aware about. For example: if a branch office does not have a FortiGate administrator, you will need to know at all times that the IPsec VPN tunnel is still up and running. An alert email notification message can be configured to send only if IPsec tunnel errors occur.
3. If your organization or company uses peer-to-peer programs such as Skype or other instant messaging software, use the Applications FortiView dashboard, or the Executive Summary’s report widget (Top 10 Application Bandwidth Usage Per Hour Summary) to help you monitor the usage of these types of instant messaging software. These widgets can help you in determining how these applications are being used, including if there is any misuse and abuse. Their information is taken from application log messages; however, application log messages should be viewed as well since they contain the most detailed information.
4. Ensure that your backup solution is up-to-date. If you have recently expanded your log setup, you should also review your backup solution. The backup solution provides a way to ensure that all logs are not lost in the event that the log device fails or issues arise with the log device itself.

 

Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Reports

Reports provide a clear, concise overview of what is happening on your network based on log data, and can be customized to serve different purposes. There are three types of reports supported by the FortiGate: FortiOS Reports, FortiCloud Reports, and FortiAnalyzer Reports.

FortiOS Reports are generated and configured on the FortiGate unit itself, FortiCloud Reports are created and configured on the FortiCloud site and mirrored to the connected FortiGate for viewing, and FortiAnalyzer reports Best practices: Log management

are created and configured on a FortiAnalyzer unit. For more information about those reports, see the FortiAnalyzer Administration Guide.

In order to create FortiOS Reports on a device, disk logging must be enabled. Not all devices are capable of disk logging; check the Feature Matrix to see if your unit has a hard disk. Once disk logging has been enabled, Local Reports can then be enabled in System > Feature Visibility in order to view and edit reports.

What are FortiOS reports?

FortiOS reports are created from logs stored on the FortiGate unit’s hard drive. These reports, generated by the FortiGate unit itself, provide a central overview of traffic and security features on the FortiGate. A default FortiOS report, called the FortiGate Security Feature Daily Activity Report, is available for you to use or modify to your requirements. The default report compiles security feature activity from various security-related logs, such as virus and attack logs. You can quickly and easily create your own report from within the management interface.

What you can do with the default FortiOS report

On the Log & Report > Local Reports page, you can set the frequency and timing of auto-generated reports.

You can select Run Nowon the Local Reports page to immediately create a report with the current layout and design. More complex reports may take longer to generate. After generating a report, you can view it by selecting it from the list below Run Now.

Historical reports will be marked as ‘Scheduled’ if created automatically, or ‘On Demand’ if created by selecting

Run Now.

What are FortiCloud reports?

FortiCloud reports are created from logs stored on the FortiCloud log management service. An active FortiCloud

Service Subscription is required in order to view, configure, or use these reports. They are generated by

FortiCloud according to a schedule you set, and then mirrored to the FortiGate interface and can be viewed at Log & Report > FortiCloud Reports, which may not appear in the interface until a report is created. If you wish to configure the report design or structure, you will have to do so from the FortiCloud portal website.

See the FortiCloud Administration Guide for more information about using and configuring FortiCloud reports.

Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Log devices

The FortiGate unit supports a variety of log devices, including the FortiCloud service and FortiAnalyzer units. This provides greater flexibility not only when choosing a log device, but also when your logging requirements need updating.

When you have developed a plan that meets your logging needs and requirements, you need to select the log device that is appropriate for that plan. A log device must be able to store all the logs you need, and if you require archiving those logs, you must consider what log devices support this option.

During this process of deciding what log device meets your needs and requirements, you must also figure out how to provide a backup solution in the event the log device that the FortiGate unit is sending logs to has become unavailable. A backup solution should be an important part of your log setup because it helps you to maintain all logs and prevents lost logs, or logs that are not sent to the log device. For example, a daily backup of log files to the FortiAnalyzer unit occurs at 5 pm.

Log devices provide a central location for storing logs recorded by the FortiGate unit. The following are log devices that the FortiGate unit supports:

l FortiGate system memory l Hard disk or AMC l SQL database (for FortiGate units that have a hard disk) l FortiAnalyzer unit l FortiCloud service l Syslog server

These log devices, except for the FortiGate system memory and local hard disk, can also be used as a backup solution. For example, you can configure logging to the FortiGate unit’s local disk, but also configure logging to a FortiCloud server and archive logs to both the FortiCloud server and a FortiAnalyzer unit.

FortiGate unit’s system memory and hard disk

The FortiGate unit’s system memory and hard disk can store all log types, including log archives and traffic logs. Traffic logs and log archives are larger files, and need a lot of room when being logged by the FortiGate unit.

When the system memory is full, the FortiGate unit overwrites the oldest messages, and all log messages stored in memory are cleared when the FortiGate unit restarts. By default, logging to memory is enabled. This means that most of the time you will only need to modify the default settings to your network logging requirements. Realtime logging occurs whenever memory logging is enabled, and is enabled by default. Real-time logging means that the activity is being recorded as it happens.

All FortiGate units 100D and larger are capable of disk logging, but it is disabled by default, as it is not recommended. For flash memory-based units, constant rewrites to flash drives can reduce the lifetime and efficiency of the memory. For hard-disk units, it can affect performance under heavy strain. Therefore, disk devices

logging must be manually enabled in the CLI under config log disk setting to appear in the interface at all.

Models without a hard disk are not recommended for disk logging. For all units, disk logging must be enabled in the CLI. For some low-end and older models, disk logging is unavailable. Check a product’s Feature Matrix for more information. In either case, Fortinet recommends using either a FortiAnalyzer unit or the FortiCloud service.

Local disk or memory logging is not required for you to configure logging to a FortiAnalyzer unit.

If you are registered with the FortiCloud service, your unit will log both locally and to the service by default. In order to configure the rate and time of uploads to the service, you must register a contract account for the FortiCloud service, which will also grant you additional space.

FortiAnalyzer unit

The FortiAnalyzer unit can log all FortiGate features, which includes log archives. You can also configure the FortiGate unit to upload logs to the FortiAnalyzer unit at a scheduled time.

Encryption of the logs is supported by default and logs are sent using SSL VPN. When the FortiAnalyzer and FortiGate units have SSL encryption, both must choose a setting for the enc-algorithm command (CLI) for encryption to take place. By default, this is enabled and the default setting is a SSL communication with high and medium encryption algorithms. The setting that you choose must be the same for both.

FortiGate units can support logging to multiple FortiAnalyzer units. This logging solution is a backup redundancy solution, since logs are sent to all three units and whenever one of the FortiAnalyzer units fails, the others still carry on storing logs.

If you are using evaluation software FortiGate and FortiAnalyzer-VM images, you will only be able to use lowlevel encryption.

The FortiGate unit can also connect to a FortiAnalyzer unit using Automatic Discovery. Automatic Discovery is a method of establishing a connection to a FortiAnalyzer unit by using the FortiGate unit to find a FortiAnalyzer unit on the network. The Fortinet Discovery Protocol (FDP) is used to located the FortiAnalyzer unit. Both the FortiGate and FortiAnalyzer units must be on the same subnet to use FDP, and they must also be able to connect using UDP.

When you enable automatic discovery in the CLI, the FortiGate unit uses HELLO packets to locate any

FortiAnalyzer units that are available on the network within the same subnet. When the FortiGate unit discovers a FortiAnalyzer unit, the FortiGate unit automatically enables logging to the FortiAnalyzer unit and begins sending log data.

Syslog server

A Syslog server is a remote computer running syslog software. Syslog is a standard for forwarding log messages in an IP network, and can be used when considering a log backup solution for your network logging requirements. Logs that are generated in real-time are sent to the syslog server in real time with no queueing, so it can be an ideal solution for comprehensive logging, or collecting logs for later systematic analysis.

FortiGate units support the reliable syslog feature, which is based on RFC 3195. Reliable syslog logging uses TCP, which ensures that connections are set up, including that packets are transmitted.

There are several profiles available for reliable syslog, but only the RAW profile is currently supported on the FortiGate units. The RAW profile is designed to provide a high-performance, low-impact footprint using essentially the same format as the existing UDP-based syslog service. The reliable syslog feature is available on FortiGate units running FortiOS 4.0 MR1 and higher.

When enabling the reliable syslog (available only in the CLI), TCP is used. The feature is disabled by default, and when enabled, the FortiGate unit automatically changes the port number to TCP 601. This is based on RFC 3195. The default port for syslog is port 514.

If you are using the local hard disk on a device for WAN Optimization, it will not prevent you from logging to remote FortiAnalyzer devices or Syslog servers. Some models have two hard disks, allowing both local logging and Wan Opt.

If you have Virtual Domains configured, each VDOM may only be assigned one FortiAnalyzer device and one Syslog server, by overriding the global configuration. The root VDOM is not limited in this way.

How to choose a log device for your network topology

When planning the log requirements, you must also consider your network’s topology and whether archiving is required, such as if there is a legal requirement to keep a historical record of network activity. The following explains what steps to take when choosing a log device for your specific network topology.

1. What is the scope of your network topology?

If it is a SOHO/SMB network, then logging to the FortiGate unit’s local hard disk or the default FortiCloud service would be efficient. If the network topology is a large enterprise, you will need FortiAnalyzer units, a FortiCloud contract, Syslog servers, or any combination.

2. Is archiving required?

If the network activity that is being logged needs to be archived, then, depending on your network topology, you would choose a FortiAnalyzer unit. FortiAnalyzer units store archives in the same way that FortiGate units do, but are able to store large amounts of logs and archives.

3. When troubleshooting, you may want to log a larger amount of traffic; how much storage space will you need?

Logs can be configured to roll, which is similar to zipping a file; this will lower the space requirements needed to contain them. You can also download logs from the FortiGate unit and save them on a server or on a computer to view and access later, to prevent them from piling up and being overwritten. If you’re regularly logging large amounts of traffic, you should consider a FortiAnalyzer or FortiCloud account .

4. Should I invest in a log device that can grow as my network grows?

All networks grow, so investing in a device that can grow with your network and that can be expanded is a good investment. For example, if you currently have a SOHO/SMB topology, but see growth already starting, a FortiAnalyzer unit would be best. A FortiAnalyzer unit provides ample storage space, and you can add two more FortiAnalyzer units to access additional storage and create a redundancy log backup solution.

How to create a backup solution for logging

The following helps to explain how to create a log backup solution for a small network topology. This example has one FortiAnalyzer unit and a subscription to the FortiCloud Service.

Example of an integrated FortiAnalyzer unit and Syslog servers in a network

1. Log in to the CLI and modify what features will be logged to the FortiAnalyzer unit as well as the settings to the default log device, the FortiGate unit’s hard drive.

By default, the FortiGate unit logs to either the system memory or hard drive, whichever is available on the FortiGate unit. Low-end FortiGate units may have logging disabled by default.

2. In the CLI, use the config log fortianalyzer setting command to configure logging to the

FortiAnalyzer unit.

You can only configure log settings for the FortiAnalyzer unit in the CLI. Configuring to upload logs to a FortiAnalyzer unit can be configured in both the CLI and web-based manager.

3. In the CLI, configure the settings for the Syslog server; also enable reliable syslog as well.

Reliable syslog verifies that logs are sent to the syslog server. When you enable this setting, the default port becomes port 601.

Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Notifications about network activity

Alert email messages provide notification about activities or events logged. These email messages also provide notification about log severities that are recorded, such as a critical or emergency.

You can send alert email messages to up to three email addresses. Alert messages are also logged and can be viewed from the Event Log menu, in the System Event log file.

You can use the alert email feature to monitor logs for log messages, and to send email notification about a specific activity or event logged. For example, if you require notification about administrators logging in and out, you can configure an alert email that is sent whenever an administrator logs in and out. You can also base alert email messages on the severity levels of the logs.

Before configuring alert email, you must configure at least one DNS server if you are configuring with an Fully Qualified Domain Server (FQDN). The FortiGate unit uses the SMTP server name to connect to the mail server, and must look up this name on your DNS server. You can also specify an IP address.

The default minimum log severity level is Alert. If the FortiGate unit collects more than one log message before an interval is reached, the FortiGate unit combines the messages and sends out one alert email.

How to configure email notifications

The following explains how to configure an alert email notification for IPsec tunnel errors, firewall authentication failure, configuration changes and FortiGuard license expiry.

1. In System > Advanced, under Email Service, configure the SMTP server.

The SMTP server settings allow the FortiGate unit to know exactly where the email will be sent from, as well as who to send it to. The SMTP server must be a server that does not support SSL/TLS connections; if the SMTP server does, the alert email configuration will not work. The FortiGate unit does not currently support SSL/TLS connections for SMTP servers.

2. In Log & Report > Alert E-mail, enter the source email in the Email From field, and up to three target addresses in the Email To fields.
3. Below the email entry, you can configure the email responses. By default, the Send alert email for the following is enabled. Select the check boxes beside IPsec tunnel errors, Configuration changes and Firewall authentication failure.

These alerts will be sent to the email address specified when the trigger occurs. For example, a user attempts to connect to the branch office of the company but cannot; the FortiGate unit detects an IPsec tunnel error, records the event, and then sends the notice to the email address specified in the SMTP server settings.

4. Select FortiGuard license expiry time: and then enter 10 so that the email notification will be sent ten days prior to the FortiGuard license expiration.

You can choose up to 100 days prior to when the license will expire. The default time is 15 days. By using this alert email notification, you can easily know when to send an re-registration request long before the expiry.

Log devices

Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Log database and datasets

The log database, also known as the SQL log database, is used to store logs on FortiGate units that have a builtin hard disk. The log database uses Structured Query Lanaguage (SQL), specifically it uses SQLite which is an embedded Relational Database Management System (RDBMS).

If you have disabled SQL logging and have factory defaults on the FortiGate unit, and then you upgrade the firmware, the upgrade will automatically disable SQL logging. When this occurs, you must re-enable SQL logging manually.

The FortiGate unit creates a database table for each log type, when log data is recorded. If the FortiGate unit is not recording log data, it does not create log tables for that device.

If you want to view the size of the database, as well as the log database table entries, use the get report sqlstatus command. This command displays the amount of free space that is available as well as the first and last log database entry time and date.

The output of the get report sql status command contains information similar to the following:

Database size: 294912

Free size in database: 0 Database Page Size: 8192 Entry number:

Event: 49

Traffic: 370

Attack: 2

AntiVirus: 4

WebFilter: 254

AntiSpam: 2

Netscan: 18

Total: 699

First entry time: 2012-09-10 11:41:02

Last entry time: 2012-09-13 02:59:59

The log database is not only used to store logs, but also used to extract the information for reports. Reports are built from datasets, which are SQL statements that tell the FortiGate unit how to extract the information from the database. You can create your own datasets; however, SQL knowledge is required. Default datasets are available for reports.

Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!