Traffic Shaping Policies

Traffic Shaping Policies

New Traffic Shaper Policy Configuration Method (269943)

Previously, traffic shapers were configured in Policy & Objects > Objects > Traffic Shapers and then applied in security policies under Policy & Objects > Policy > IPv4 . In FortiOS 5.4, traffic shapers are now configured in a new traffic shaping section in Policy & Objects > Traffic Shapers.

The way that traffic shapers are applied to policies has changed significantly in 5.4., because there is now a specific section for traffic shaping policies in Policy & Objects > Traffic Shaping Policy. In the new traffic shaping policies, you must ensure that the Matching Criteria is the same as the security policy or policies you want to apply shaping to.

There is also added Traffic Shaper support based on the following:

  • Source (Address, Local Users, Groups)
  • Destination (Address, FQDN, URL or category)
  • Service (General, Web Access, File Access, Email and Network services, Authentication, Remote Access, Tunneling, VoIP, Messaging and other Applications, Web Proxy)
  • Application
  • Application Category
  • URL Category

 

Creating Application Control Shapers

Application Control Shapers were previously configured in the Security Profiles > Application Control section, but for simplicity they are now consolidated in the same section as the other two types of traffic shapers: Shared and Per-IP.

To create an Application Control Shaper, you must first enable application control at the policy level, in Policy

& Objects > Policy > [IPv4 or IPv6]. Then, you can create a matching application-based traffic shaping policy that will apply to it, in the new Traffic Shaping section under Policy & Objects > Traffic Shaping Policy.

New attributes added to “firewall shaping-policy” (277030) (275431)

The two new attributes are status and url-category. The status attribute verifies whether the policy is set to enabled or disabled. The url-category attribute applies the shaping-policy to sessions without a URL rating when set to 0, and no web filtering is applied.

Syntax:

config firewall shaping-policy edit 1

set status enable

set url-category [category ID number]

New button added to “Clone” Shapers

You can now easily create a copy of an existing shaper by selecting the shaper and clicking the Clone button.

 


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

This entry was posted in FortiOS 5.4 Handbook and tagged , , , on by .

About Mike

Michael Pruett, CISSP has a wide range of cyber-security and network engineering expertise. The plethora of vendors that resell hardware but have zero engineering knowledge resulting in the wrong hardware or configuration being deployed is a major pet peeve of Michael's. This site was started in an effort to spread information while providing the option of quality consulting services at a much lower price than Fortinet Professional Services. Owns PacketLlama.Com (Fortinet Hardware Sales) and Office Of The CISO, LLC (Cybersecurity consulting firm).

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.