Firmware Change Management – FortiOS 5.2 Best Practices

Firmware change management

Consider the following five points when performing firmware upgrades, not only in FortiOS but in general. This applies to pretty much any change you have to do in a production environment.

Understanding the new version first

Before attempting any changes in production, first make sure you set up a laboratory where you can freely play with the new features, and understand them with enough time and no pressure. Read the Release Notes, Manuals, and other documentation like presentations, videos, or podcasts about the new version. Youare ready to explain the need for an upgrade once you understand:

  • The differences and the enhancements between the new version and the previous version(s).
  • The impact of the upgrade on customers and the users of the operating platform.
  • The known limitations that might affect your environment.
  • The potential risks when performing the upgrade.
  • The licensing changes that may apply.

Have a valid reason to upgrade

The reason can NOT be “Because I want to have the latest version”. The reason has to be explained in terms of business, technical, and/or operational improvement. Affirmative answers to the following questions are valid reasons to upgrade:

  • Does the new version have a feature that helps to ensure compliance?
  • Does the new version have an enhancement that allows 40% decrease (40% improvement) on the time to perform a certain operation?
  • Does the new feature correct a known defect/bug found on a previous version that affects the company business/operations?
  • Will the new version allow your organization to deploy new services that will help to gain new customers or increase loyalty of existing ones?
  • Is the vendor cutting support for the version your organization is currently using? If the best reason to upgrade is “Because the new features seem to be cool” or “Because I want to have the latest version”, a little more understanding and planning may be necessary.

Prepare an upgrade plan

If you choose to upgrade because you found a valid reason to do so, make sure you create a plan that covers business, technical, and operational aspects of the upgrade:

Business:

Proper planning and justification for an upgrade should be proportional to how critical the system is to the business.

  • Make sure you can clearly articulate the benefits of the upgrade in business terms (time, money, and efficiency).
  • Understand the business processes that will be affected by the change.
  • Make sure the upgrade maintenance window is not close to a business-critical process (such as quarterly or monthly business closure).
  • Obtain executive and operational approval for the maintenance window. The approval must come from the owners of ALL the systems/information affected by the upgrade, not only from those that own the system being upgraded. The approval must be done in a formal (written or e-mail) form.

Technical and operational:

  • Re-read the Release Notes for the technology you are upgrading. Supported hardware models, upgrade paths, and known limitations should be clearly understood.
  • Make sure your upgrade maintenance window does not overlap with any other maintenance window on your infrastructure.
  • If you have any premium support offer (such as TAM, Premium Support), do a capacity planning exercise to ensure the new firmware/software version does not take more hardware resources than you currently have.
  • Create a backup, whether or not you have scheduled backups. Create a new fresh backup.
  • Obtain offline copies of both the currently installed firmware and the new version.
  • Create a list of systems with inter-dependencies to the system you are upgrading. For example, if you are upgrading a FortiGate; understand the impact on any FortiAP, FortiAuthenticator, FortiToken, FortiManager, or FortiAnalyzer you have on your environment.
  • Ensure you have a list of adjacent devices to the upgrading platform and have administrative access to them, just in case you need to do some troubleshooting. Are you upgrading FortiWeb? Make sure you can administratively access the Web Applications. Are you upgrading a FortiGate? Make sure you can administratively access the surrounding switches and routers.
  • Have a step-by-step plan on how to perform and test the upgrade. You want to make sure you think of the worst situation before it happens, and have predefined courses of action, instead of thinking under pressure when something already went wrong.
  • Define a set of tests (that include critical business applications that should be working) to make sure the upgrade went fine. If any test does not go well, define which ones mandate a rollback and which ones can be tolerated for further troubleshooting. This set of tests should be run before and after the upgrade to compare results, and they should be the same.
  • Define a clear rollback plan. If something goes wrong with the upgrade or the tests, the rollback plan will help you get your environment back to a known and operational status. The plan must clearly state the conditions under which the rollback will be started.
  • Declare configuration freezes. A little bit before and after the upgrade. The idea is to reduce the amount of variables to take into consideration if something goes wrong.
  • Perform a “Quality Assurance” upgrade. Grab a copy of the production configuration, load it on a non-production box and execute the upgrade there to see if there are any issues on the process. Then adjust your plan according to the results you obtained.
  • Have a list of information elements to be gathered if something goes wrong. This ensures that, even if the upgrade fails, you will collect enough information so you can troubleshoot the issue without needing to repeat the problem. Get help from TAC/Support departments if you need to check what else could be missing on your list.
  • Define a test monitoring period after the change was completed. Even if the upgrade went smoothly, something could still go wrong. Make sure you monitor the upgraded system for at least one business cycle. Business cycles may be a week, a month, or a quarter, depending on your organization’s business priorities.

Execute the upgrade plan

Execution of an upgrade is just as key as planning. Once you are performing the upgrade, the pressure will rise and stress might peak. This is why you should stick to the plan you created with a cool head. Resist the temptation to take decisions while performing the upgrade, as your judgment will be clouded by the stress of the moment, even if a new decision seems to be “obvious” at such time. If your plan says you should rollback, then execute the rollback despite the potential “We-can-fix-this-very-quickly” mentality. While performing the upgrade, make sure all the involved components are permanently monitored before, during, and after the upgrade, either via monitoring systems, SNMP alerts, or at least with tools like a ping. Critical resources like CPU, memory, network, and/or disk utilization must also constantly monitored. To avoid misunderstandings, when performing the tests for each critical application defined on the planning, make sure there are formal notifications on the results for each user area, service, system, and/or application tested. Regardless if you have to rollback or not, if a problem occurs, make sure you gather as much information about the problem as possible, so you can later place a support ticket to find a solution. Last but not least, document the upgrade:

  • Enable your terminal emulation program to leave trace of all the commands executed and all the output generated. If you are performing steps via GUI, consider using a video capture tool to document it.
  • Document any command or change performed over the adjacent/interdependent systems. Make sure they are acknowledged by the relevant administrators
  • Document any deviations performed over the upgrade plan. This is planned-versus-actual.

Learn more about change management

Change Management and Change Control are huge knowledge areas in the field of Information Systems and Computer/Network Security. This document is by no means a comprehensive list on what you should do when performing an upgrade, with either Fortinet or any other technology. It is merely a list of important things you should take into consideration. Firmware when performing upgrades which are the result of years of experience dealing with changes on critical environments, as it is common that security devices are protecting critical applications and processes. There are vast resources on the topic: books, public whitepapers, blog entries, etc. If you search the Internet for the “Change Control Best Practices” or “Change Management Best Practices” you will get many interesting documents.

 

Performing a firmware upgrade

Upgrading a firewall is something that should be compared to upgrading the operating system on your computer. It’s not to be taken lightly! You want to make sure everything is backed up and you have some options available if things go awry. Assuming it all seems to work you also want a list of things to do in order to confirm everything is working properly. Finally, you need enough time to do it. All really simple stuff, but what does this mean in relation to upgrading your FortiGate? It means, you follow these simple steps:

1. Backup and store old configuration (full configuration backup from CLI). Digging into this a little, step 1 is easy to understand. Do a full backup of your old configuration. This is all part of your disaster recovery plan. If the upgrade fails in some way you need to make sure you can get the Firewall back up and running. The best way to do this is to get it back to a state where you know what the behavior was.

2. Have copy of old firmware available. Step 2, is also part of your disaster recovery. If the upgrade fails you might be able to switch the active partition. But as a Professional, you need to be prepared for the worst case scenario where you can’t do that. Which means you’ll need your old firmware.

3. Have disaster recovery option on standby — especially if remote. Step 3, is your plan for what to do in the event of a critical failure. As we’re talking FortiGate this means that your firewall doesn’t come back after the upgrade. What this means is that you need to be able to get to the console port in order to find out why. Maybe it’s DHCP and the IP changed, maybe the OS is corrupt, who knows? Get to the console and find out. There could be a simple fix. If there’s not, then be prepared for a format and TFTP reload.

4. Read the release notes, including the upgrade path and bug information. Step 4, READ THE RELEASE NOTES. They contain all kinds of information, known bugs, fixed bugs even upgrade issues like lost configuration settings. Not all upgrade information is ever contained in any products release notes. That does not mean they are devoid of good/useful information. Read them, digest them, then a few days later read them again.

5. Double check everything. Step 5, do a double check of everything. Is your TFTP server working, does your console connection function, is there anything in the release notes that could impact your upgrade procedure, do you have your configuration backed up? Make sure you’ve done everything.

6. Upgrade. Step 6, do the upgrade. Doing an upgrade doesn’t take very long, a few minutes (less a lot of times) but make sure you schedule enough time for it. At the end of the day an upgrade can succeed or fail. If it succeeds you want  some time to check/confirm that any important features you have are working (VPNs etc). If it fails you’ll need time to sort things out.


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

This entry was posted in FortiOS, FortiOS 5.2 Best Practices on by .

About Mike

Michael Pruett, CISSP has a wide range of cyber-security and network engineering expertise. The plethora of vendors that resell hardware but have zero engineering knowledge resulting in the wrong hardware or configuration being deployed is a major pet peeve of Michael's. This site was started in an effort to spread information while providing the option of quality consulting services at a much lower price than Fortinet Professional Services. Owns PacketLlama.Com (Fortinet Hardware Sales) and Office Of The CISO, LLC (Cybersecurity consulting firm).

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.