Category Archives: FortiOS 5.4 Handbook

The complete handbook for FortiOS 5.4

Configuring Peer user groups

Configuring Peer user groups

Peer user groups can only be configured using the CLI. Peers are digital certificate holders defined using the config user peer command. The peer groups you define here are used in dialup IPsec VPN configurations that accept RSA certificate authentication from members of a peer certificate group.

 

To create a peer group – CLI example:

config user peergrp edit vpn_peergrp1

set member pki_user1 pki_user2 pki_user3 end


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

SSO user groups

SSO user groups

SSO user groups are part of FSSO authentication and contain only Windows or Novell network users. No other user types are permitted as members. Information about the Windows or Novell user groups and the logon activities of their members is provided by the Fortinet Single Sign On (FSSO) which is installed on the network domain controllers.

You can specify FSSO user groups in security policies in the same way as you specify firewall user groups. FSSO user groups cannot have SSL VPN or dialup IPsec VPN access.

For information about configuring FSSO user groups, see Creating Fortinet Single Sign-On (FSSO) user groups on page 589. For complete information about installing and configuring FSSO, see Agent-based FSSO on page 553.


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Troubleshooting FSSO

Troubleshooting FSSO

When installing, configuring, and working with FSSO some problems are quite common. A selection of these problems follows including explanations and solutions.

Some common Windows AD problems include:

  • General troubleshooting tips for FSSO
  • Users on a particular computer (IP address) can not access the network
  • Guest users do not have access to network

 

General troubleshooting tips for FSSO

The following tips are useful in many FSSO troubleshooting situations.

  • Ensure all firewalls are allowing the FSSO required ports through.

FSSO has a number of required ports that must be allowed through all firewalls or connections will fail. These include: ports 139, 389 (LDAP), 445, 636 (LDAP).

  • Ensure there is at least 64kbps bandwidth between the FortiGate unit and domain controllers. If there is insufficient bandwidth, some FSSO information might not reach the FortiGate unit. The best solution is to configure traffic shaping between the FortiGate unit and the domain controllers to ensure that the minimum bandwidth is always available.

 

Users on a particular computer (IP address) can not access the network

Windows AD Domain Controller agent gets the username and workstation where the logon attempt is coming from. If there are two computers with the same IP address and the same user trying to logon, it is possible for the authentication system to become confused and believe that the user on computer_1 is actually trying to access computer_2.

Windows AD does not track when a user logs out. It is possible that a user logs out on one computer, and immediate logs onto a second computer while the system still believes the user is logged on the original computer. While this is allowed, information that is intended for the session on one computer may mistakenly end up going to the other computer instead. The result would look similar to a hijacked session.

 

Solutions

  • Ensure each computer has separate IP addresses.
  • Encourage users to logout on one machine before logging onto another machine.
  • If multiple users have the same username, change the usernames to be unique.
  • Shorten timeout timer to flush inactive sessions after a shorter time.

 

Guest users do not have access to network

A group of guest users was created, but they don’t have access.

 

Solution

The group of the guest users was not included in a policy, so they do not fall under the guest account. To give them access, associate their group with a security policy.

Additionally, there is a default group called SSO_Guest_Users. Ensure that group is part of an identity-based security policy to allow traffic.

 


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Testing FSSO

Testing FSSO

Once FSSO is configured, you can easily test to ensure your configuration is working as expected. For additional FSSO testing, see Troubleshooting FSSO on page 551.

1. Logon to one of the stations on the FSSO domain, and access an Internet resource.

2. Connect to the CLI of the FortiGate unit, and if possible log the output.

3. Enter the following command:diagnose debug authd fsso list

4. Check the output. If FSSO is functioning properly you will see something similar to the following:

—-FSSO logons—-

IP: 192.168.1.230 User: ADMINISTRATOR Groups: VLAD-AD/DOMAIN USERS IP: 192.168.1.240 User: ADMINISTRATOR Groups: VLAD-AD/DOMAIN USERS Total number of users logged on: 2

—-end of FSSO logons—-

The exact information will vary based on your installation.

 

5. Check the FortiGate event log, for FSSO-auth action or other FSSO related events with FSSO information in the message field.

6. To check server connectivity, run the following commands from the CLI:

FGT# diagnose debug enable

FGT# diagnose debug authd fsso server-status

FGT# Server Name Connection Status

———– —————– SBS-2003 connected


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

FortiOS FSSO log messages

FortiOS FSSO log messages

There are two types of FortiOS log messages — firewall and event. FSSO related log messages are generated from authentication events. These include user logon and log off events, and NTLM authentication events. These log messages are central to network accounting policies, and can also be useful in troubleshooting issues. For more information on firewall logging, see Enabling security logging on page 507. For more information on logging, see the FortiOS Handbook Logging and Reporting guide.

 

Enabling authentication event logging

For the FortiGate unit to log events, that specific type of event must be enabled under logging.

When VDOMs are enabled certain options may not be available, such as CPU and memory usage events. You can enable event logs only when you are logged on to a VDOM; you cannot enable event logs globally.

To ensure you log all the events needed, set the minimum log level to Notification or Information. Firewall logging requires Notification as a minimum. The closer to Debug level, the more information will be logged.

To enable event logging:

1. Go to Log&Report > Log Config > Log Settings.

2. In Event Logging, select

System activity event              All system-related events, such as ping server failure and gateway status.

User Activity event                   All administration events, such as user logins, resets, and configuration updates.

3. Select Apply.

List of FSSO related log messages

 

Message ID                      Severity                            Description
43008                                 Notification                         Authentication was successful
43009                                 Notification                         Authentication session failed
43010                                 Warning                              Authentication locked out
43011                                 Notification                         Authentication timed out
43012                                 Notification                         FSSO authentication was successful

 

Message ID                      Severity                            Description
43013                                 Notification                         FSSO authentication failed
43014                                 Notification                         FSSO user logged on
43015                                 Notification                         FSSO user logged off
43016                                 Notification                         NTLM authentication was successful
43017                                 Notification                         NTLM authentication failed

 

For more information on logging, see the FortiOS Handbook Logging and Reporting guide.


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Creating security policies

Creating security policies

Policies that require FSSO authentication are very similar to other security policies. Using identity-based policies, you can configure access that depends on the FSSO user group. This allows each FSSO user group to have its own level of access to its own group of services

In this situation, Example.com is a company that has its employees and authentication servers on an internal network. The FortiGate unit intercepts all traffic leaving the internal network and requires FSSO authentication to access network resources on the Internet. The following procedure configures the security policy for FSSO authentication. FSSO is installed and configured including the RADIUS server, FSSO Collector agent, and user groups on the FortiGate

For the following procedure, the internal interface is port1 and the external interface connected to the Internet is port2. There is an address group for the internal network called company_network. The FSSO user group is called fsso_group, and the FSSO RADIUS server is fsso_rad_server.

 

To configure an FSSO authentication security policy – web-based manager:

1. Go to Policy & Objects > Policy > IP4 and select Create New.

2. Enter the following information.

Incoming Interface                   port1

Source Address                        company_network

Source User(s)                          fsso_group

Outgoing Interface                   port2

Destination Address                 all

Schedule                                    always

Service                                       HTTP, HTTPS, FTP, and Telnet

Action                                         ACCEPT

NAT                                             ON

UTM Security Profiles              ON for AntiVirus, IPS, Web Filter, and Email Filter, all using default pro- files.

Log Allowed Traffic                  ON. Select Security Events.

3. Select OK.

4. Ensure the FSSO authentication policy is higher in the policy list than more general policies for the same interfaces.

 

To create a security policy for FSSO authentication – CLI:

config firewall policy edit 0

set srcintf port1 set dstintf port2

set srcaddr company_network set dstaddr all

set action accept

set groups fsso_group set schedule always

set service HTTP HTTPS FTP TELNET

set nat enable end

Here is an example of how this FSSO authentication policy is used. Example.com employee on the internal company network logs on to the internal network using their RADIUS username and password. When that user attempts to access the Internet, which requires FSSO authentication, the FortiGate authentication security policy intercepts the session, checks with the FSSO Collector agent to verify the user’s identity and credentials, and then if everything is verified the user is allowed access to the Internet.

 

Enabling guest access through FSSO security policies

You can enable guest users to access FSSO security policies. Guests are users who are unknown to Windows AD and servers that do not logon to a Windows AD domain.

To enable guest access in your FSSO security policy, add an identity-based policy assigned to the built-in user group SSO_Guest_Users. Specify the services, schedule and UTM profiles that apply to guest users — typically guests have access to a reduced set of services. See Creating security policies on page 548.


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Creating Fortinet Single Sign-On (FSSO) user groups

Creating Fortinet Single Sign-On (FSSO) user groups

You cannot use Windows or Novell groups directly in FortiGate security policies. You must create FortiGate user groups of the FSSO type and add Windows or Novell groups to them.

 

To create a user group for FSSO authentication – web-based manager:

1. Go to User & Device > User > User Groups and select Create New.

The New User Group dialog box opens.

2. In the Name box, enter a name for the group, FSSO_Internet_users for example.

3. In Type, select Fortinet Single Sign-On (FSSO).

4. In Members, select the required FSSO groups.

5. Select OK.

 

 

To create the FSSO_Internet-users user group – CLI

config user group

edit FSSO_Internet_users

set group-type fsso-service

set member CN=Engineering,cn=users,dc=office,dc=example,dc=com

CN=Sales,cn=users,dc=office,dc=example,dc=com

end

 

Default FSSO group

SSO_Guest_users is a default user group enabled when FSSO is configured. It allows guest users on the network who do not have an FSSO account to authenticate and have access to network resources. See Enabling guest access through FSSO security policies on page 550.


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

Configuring Single Sign On to Windows AD

Configuring Single Sign On to Windows AD

On the FortiGate unit, security policies control access to network resources based on user groups. With Fortinet Single Sign On, this is also true but each FortiGate user group is associated with one or more Windows AD user groups. This is how Windows AD user groups get authenticated in the FortiGate security policy.

Fortinet Single Sign On sends information about Windows user logons to FortiGate units. If there are many users on your Windows AD domains, the large amount of information might affect the performance of the FortiGate unit.

To configure your FortiGate unit to operate with either a Windows AD or a Novell eDirectory FSSO install, you

  • Configure LDAP access to the Windows AD global catalog. See Configuring LDAP server access on page 546.
  • Configure the LDAP Server as a Single Sign-On server. See Configuring the LDAP Server as a Single Sign-On server on page 547.
  • Add Active Directory user groups to FortiGate FSSO user groups. See Creating Fortinet Single Sign-On (FSSO) user groups on page 548.
  • Create security policies for FSSO-authenticated groups. See Creating security policies on page 548.
  • Optionally, specify a guest protection profile to allow guest access. See Enabling guest access through FSSO security policies on page 550

 

Configuring LDAP server access

The FortiGate unit needs access to the domain controller’s LDAP server to retrieve user group information.

The LDAP configuration on the FortiGate unit not only provides access to the LDAP server, it sets up the retrieval of Windows AD user groups for you to select in FSSO. The LDAP Server configuration (in User & Device > Authentication > LDAP Servers) includes a function to preview the LDAP server’s response to your distinguished name query. If you already know the appropriate Distinguished Name (DN) and User DN settings, you may be able to skip some of the following steps.

 

To add an LDAP server – web-based manager:

1. Go to User & Device > Authentication > LDAP Servers and select Create New.

2. Enter the Server IP/Name and Server Port (default 389).

3. In the Common Name Identifier field, enter sAMAccountName.The default common name identifier is cn.

This is correct for most LDAP servers. However some servers use other identifiers such as uid.

4. In the Distinguished Name field, enter your organization distinguished name. In this example, Distinguished

Name is dc=techdoc,dc=local

5. Select Fetch DN, this will fetch the Windows AD directory.

6. Set Bind Type to Regular.

7. In the User DN field, enter the administrative account name that you created for FSSO.

For example, if the account is administrator, enter “administrator@techdoc.local”.

8. Enter the administrative account password in the Password field.

9. Optionally select Secure Connection.

  • In the Protocol field, select LDAPS or STARTTLS.
  • In the Certificate field, select the appropriate certificate for authentication. Note that you need to configure the Windows AD for secure connection accordingly.

10. Select OK.

11. Test your configuration by selecting the Test button. A successful message confirming the right settings appears.

 


Having trouble configuring your Fortinet hardware or have some questions you need answered? Check Out The Fortinet Guru Youtube Channel! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!