Endpoint security enforces the use of the FortiClient End Point Security (FortiClient and FortiClient Lite) application on your network. It can also allow or deny endpoints access to the network based on the application installed on them.
By applying endpoint security to a security policy, you can enforce this type of security on your network. FortiClient enforcement can check that the endpoint is running the most recent version of the FortiClient application, that the antivirus signatures are up-to-date, and that the firewall is enabled. An endpoint is usually often a single PC with a single IP address being used to access network services through a FortiGate unit.
With endpoint security enabled on a policy, traffic that attempts to pass through, the FortiGate unit runs compliance checks on the originating host on the source interface. Non-compliant endpoints are blocked. If someone is browsing the web, the endpoints are redirected to a web portal which explains the non-compliance and provides a link to download the FortiClient application installer. The web portal is already installed on the FortiGate unit, as a replacement message, which you can modify if required.
Endpoint Security requires that all hosts using the security policy have the FortiClient Endpoint Security agent installed. Currently, FortiClient Endpoint Security is available for Microsoft Windows 2000 and later only.
For more information about endpoint security, see the Security Profiles chapter in the FortiOS Handbook.
Having trouble configuring your Fortinet hardware or have some questions you need answered? Ask your questions in the comments below!!! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!