FortiOS 5.4.1 Release Notes

Change Log

Date Change Description
2016-06-08 Initial release.
2016-06-09 Moved 373739 from Known Issues to Resolved Issues.

Added FOS-VM64, and FOS-VM64-KVM to Supported Models.

   

 

Introduction

This document provides the following information for FortiOS 5.4.1 build 1064:

l Special Notices l Upgrade Information l Product Integration and Support l Resolved Issues l Known Issues l Limitations

See the Fortinet Document Library for FortiOS documentation.

Supported models

FortiOS 5.4.1 supports the following models.

FortiGate FG-30D, FG-30E, FG-30D-POE, FG-50E, FG-51E, FG-60D, FG-60D-POE, FG-70D,

FG-70D-POE, FG-80C, FG-80CM, FG-80D, FG-90D, FGT-90D-POE, FG-92D, FG94D-POE, FG-98D-POE, FG-100D, FG-140D, FG-140D-POE, FG- 200D, FG-200DPOE, FG-240D, FG-240D-POE, FG-280D-POE, FG-300D, FG-400D, FG-500D, FG-

600C, FG-600D, FG-800C, FG-800D, FG-900D, FG-1000C, FG-1000D, FG-1200D,

FG-1500D, FG-1500DT, FG-3000D, FG-3100D, FG-3200D, FG-3240C, FG-3600C,

FG-3700D, FG-3700DX, FG-3810D, FG-3815D, FG-5001C, FG-5001D

FortiWiFi FWF-30D, FWF-30E, FWF-30D-POE, FWF-50E, FWF-51E, FWF-60D, FWF-60DPOE, FWF-80CM, FWF-81CM, FWF-90D, FWF-90D-POE, FWF-92D
FortiGate Rugged FGR-60D, FGR-90D
FortiGate VM FG-SVM, FG-VM64, FG-VM64-AWS, FG-VM64-AWSONDEMAND, FG-VM64-HV, FG-VM64-KVM, FG-VM64-XEN , FG-VMX, FOS-VM64, FOS-VM64-KVM
FortiOS Carrier FortiOS Carrier 5.4.1 images are delivered upon request and are not available on the customer support firmware download page.

Introduction                                                                                                                               Supported models

The following models are released on a special branch based off of FortiOS 5.4.1. As such, the System > Dashboard > Status page and the output from the get system status CLI command displays the build number.

 

FG-52E is released on build 5416.
FGR-30D is released on build 5413.
FGR-30D-A is released on build 5413.
FGR-35D is released on build 5413.

To confirm that you are running the proper build, the output from the get system status CLI command has a branch point field that should read 1064.


Having trouble configuring your Fortinet hardware or have some questions you need answered? Ask your questions in the comments below!!! Want someone else to deal with it for you? Get some consulting from Fortinet GURU!

2 thoughts on “FortiOS 5.4.1 Release Notes

  1. FYI. I ran into a terrible problem using a Fortigate VM00. 5.4.1 will not run because the virtual appliance only has 1GB of memory available. Fortinet was nice enough to diagnose the problem, but really does not have an easy way of upgrading to the 2GB virtual appliance.

Leave a Reply

Name *
Email *
Website