The following information and options are available:
SNMP
SNMP Agent Select to enable the FortiManager SNMP agent. When this is enabled, it sends FortiManager SNMP traps.
Description Type a description of this FortiManager system to help uniquely identify this unit.
Location Type the location of this FortiManager system to help find it in the event it requires attention.
Contact Type the contact information for the person in charge of this FortiManager system.
SNMP v1/2c
Communities The list of SNMP v1/v2c communities added to the FortiManager configuration.
Create New Select Create New to add a new SNMP community. If SNMP agent is not selected, this control will not be visible.
For more information, see Configuring an SNMP v1/v2c community.
Community Name The name of the SNMP community.
Queries The status of SNMP queries for each SNMP community. The enabled icon indicates that at least one query is enabled. The disabled icon indicates that all queries are disabled.
Traps The status of SNMP traps for each SNMP community. The enabled icon indicates that at least one trap is enabled. The disabled icon indicates that all traps are disabled.
Enable Select to enable or deselect to disable the SNMP community.
Action Select the delete icon to remove an SNMP community.Select the edit icon to edit an SNMP community.
SNMP v3
Users The list of SNMPv3 users added to the FortiManager configuration.
Create New Select Create New to add a new SNMP community. If SNMP agent is not selected, this control will not be visible.
For more information, see Configuring a SNMPv3 user.
User Name The user name for the SNMPv3 user.
Security Level The security level assigned to the SNMPv3 user.
Notification Hosts The notification host or hosts assigned to the SNMPv3 user.
Queries The status of SNMP queries for each SNMP user. The enabled icon indicates that query is enabled. The disabled icon indicates query is disabled.
Action Select the delete icon to remove an SNMP community. Select the edit icon to edit an SNMP community.
Configuring an SNMP v1/v2c community
An SNMP community is a grouping of equipment for network administration purposes. Add SNMP communities so that the FortiManager system (the SNMP agent in this case) can connect to the SNMP manager that is monitoring.

Each community can have a different configuration for SNMP traps and can be configured to monitor different events. You can add the IP addresses of up to eight hosts to each community. Hosts can receive SNMP device traps and information.
Select Create New in the SNMP v1/v2c toolbar to open the New SNMP Community page, where you can configure a new SNMP community.
When you create a new SNMP community, there are no host entries. Selecting Add creates an entry that broadcasts the SNMP traps and information to the network connected to the specified interface.
SNMP v1/v2c community